Two-way thermo-electric zone valve.
Complete with 656114 actuator.
Spring return. Normally closed.
Max. body pressure: 150 psi.
Max. Temperature: 200°F.
Max: Δ P close-off pressure: 20 psi.
Power supply: 24 V AC/DC.
Initial current draw: 800 mA.
Power consumption: 3 W.
Rating of micro-switch contacts: 5A (24 V).
31.5" wire lead connection.
Zone valves are used to control hot and chilled water in heating and airconditioning
systems. Coupled with an electro-thermal control actuator and
managed by a room thermostat, they allow automatic on/off control of the
hydronic circuit on which they are installed.
Their special feature is their compact size and they can therefore be installed
almost anywhere including baseboard or directly in fan-coil units.
Caleffi Series 676 Two-way Thermoelectric Zone Valve
Zone valves are used to control hot and chilled water in heating and air conditioning
systems. Coupled with an electro-thermal control actuator and
managed by a room thermostat, they allow automatic on/off control of the
hydronic circuit on which they are installed.
Their special feature is their compact size and they can therefore be installed
almost anywhere including baseboard or directly in fan-coil units.
Air separator.
Brass body.
Stainless steel mesh internal element.
½" NPT bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Air separators are used to continuously remove the air contained in the
hydronic circuits of heating and cooling systems. The air discharge
capacity of these devices is very high. They are capable of removing
automatically all the air present in the system down to micro-bubble level.
The circulation of fully de-aerated water enables the equipment to operate
under optimum conditions, free from any noise, corrosion, localized
overheating or mechanical damage. Micro-bubbles, fuse together,
increase in volume until they become large enough to rise to the top where
they are automatically released.
Caleffi Series 5213 Scald Protection Three Way Mixing Valve
Adjustable, anti-scald thermostatic mixing valve.
The thermostatic mixer is used in systems producing domestic hot water or in radiant panel heating systems. Its function is to maintain the temperature of the mixed water supplied to the user constant at the set value when there are variations in the supply conditions of the incoming hot and cold water.
The valve has been specifically certified to ASSE 1017.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
The zero leakage high temperature zone valve body Z2 series is 2-way straight
through and the valve body Z3 series is 3-way diverting. The Z1 series
actuator is easily attached by a push button lock and without tools.
The high temperature and high close-off performance characteristics of these
zone valves, combined with the compact size, makes them suitable to fit inside
baseboard or directly in fan coil units.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
The zero leakage high temperature zone valve body Z2 series is 2-way straight
through and the valve body Z3 series is 3-way diverting. The Z1 series
actuator is easily attached by a push button lock and without tools.
The high temperature and high close-off performance characteristics of these
zone valves, combined with the compact size, makes them suitable to fit inside
baseboard or directly in fan coil units.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
The zero leakage high temperature zone valve body Z2 series is 2-way straight
through and the valve body Z3 series is 3-way diverting. The Z1 series
actuator is easily attached by a push button lock and without tools.
The high temperature and high close-off performance characteristics of these
zone valves, combined with the compact size, makes them suitable to fit inside
baseboard or directly in fan coil units.
Grundfos Brute Three Speed Bronze Recirculator Pump
The Grundfos UPS26-99BFC (52722518) model incorporates a three speed motor for increased versatility, a built-in check valve and a bronze housing for ehnaced corrosion resistance. The wet rotor design allows it to be virtually silent while operating, while built-in motor protection assures long life of the circulator. Performance parameters (flow rates and pressure drop) of the Grundfos UPS26-99BFC model make it well suited for a wide range of applications, from radiant and hydronic heating, to domestic hot water recirculatio, solar, chilled water cooling and many others.
Grundfos 3-Speed 1/6 Horsepower Circulator Pump with Flow Check
The Grundfos UPS26-99FC is a 3-speed cast iron circulator pump with built-in flow check. 3 speeds (Low/Med/High) of the Grundfos UPS26-99FC make this model very versatile and allow to use it in a large variety of heating applications inlcuding radiant, hydronic, radiators, fan coils, etc. A built-in flow check eliminates the need to buy and install a separate in-line check valve. This circulator is designed for closed loop systems with medium to high flow rates and pressure drops. A built-in automatic resetting thermal protection of the pump assures motor safety and extends circulator's life.
Digital Temperature Gauge with Two Universal Sensor Probes (Ds-60 and P-01)
The microprocessor-based, AZEL Technologies Digital Temperature gauge DS-60 represents the “next generation” in temperature gauge industries. The bold, hi-contrast LCD display ensures accurate temperature reading to the tenth degree and can be easily read from greater distances than the typical mechanical temperature gauge.
DS-60 REPLACES TWO mechanical temperature gauges as it can centralize the readings in one spot and simultaneously display the accurate temperatures of supply and return piping on a hydronic heating system. In addition, the solid state temperature sensor probe can be extended up to several hundred feets. The unit is designed to be powered by 24VAC input or by lithium battery. When 24VAC is supplied, the lithium battery enable the unit to work in case of power failure. Its features also include Min/Max memory which shows the highest and lowest temperature after the last reset and instant Fahrenheit to Centigrade conversion. DS-60 is also ideal for any application (EG. Solar heating or Geothermal) that requires quick and accurate response to temperature change, an easy to read display and a wide temperature range.
