Search results for 'hydronic water heater'

Heat-Flo, Inc. is a full service design and manufacturing firm dedicated to providing high quality, cost effective solutions for hydronic, solar, and electric based hot water heating system applications, and hydronic and radiant heating applications. Heat-Flo originates all product design, manufacturing, sales, and ongoing market support at our facility in Uxbridge, Massachusetts, USA.  Please inquire for more Product Detail.

Z-one valves are used to automatically shut-off the flow or redirect hot and chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an end mounted push button for quick installation to valve body. The actuator is equipped with or without auxiliary switch and configured Normally closed or Normally Opened with wire or terminal connections.

Air separators are used to continuously remove the air contained in the hydronic circuits of heating and cooling systems. The air discharge capacity of these devices is very high. They are capable of removing automatically all the air present in the system down to micro-bubble level. The circulation of fully de-aerated water enables the equipment to operate under optimum conditions, free from any noise, corrosion, localized overheating or mechanical damage. Micro-bubbles, fuse together, increase in volume until they become large enough to rise to the top where they are automatically released.

Zone valves are used to control hot and chilled water in heating and air conditioning systems. Coupled with an electro-thermal control actuator and managed by a room thermostat, they allow automatic on/off control of the hydronic circuit on which they are installed. Their special feature is their compact size and they can therefore be installed almost anywhere including baseboard or directly in fan-coil units.

Z-one valves are used to automatically shut-off the flow or redirect hot and chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an end mounted push button for quick installation to valve body. The actuator is equipped with or without auxiliary switch and configured Normally closed or Normally Opened with wire or terminal connections. The zero leakage high temperature zone valve body Z2 series is 2-way straight through and the valve body Z3 series is 3-way diverting. The Z1 series actuator is easily attached by a push button lock and without tools. The high temperature and high close-off performance characteristics of these zone valves, combined with the compact size, makes them suitable to fit inside baseboard or directly in fan coil units.

The gas pressure switch is mounted on the casing of the water heater adjacent to the heater's thermostat/gas control valve. It should be mounted close enough so that the supplied 1/4" tubing will reach from the gas pressure switch fitting to the thermostat/gas valve pressure tap port. The two provided screws are self-tapping and drilling. The screws do not require the use of a drill and their 1/2" length assures that the inner tank will not be penetrated

GB142 Water Pressure Sensor

Viessmann Vitoden Gas Boilers

 100-W Gas Fired Wall-Mounted Condensing Boiler with Modulating Stainless Steel Cylinder Burner and Inox-Radial Heat Exchanger Service.

 

Model		WB1B 26	WB1B 35
CSA input	MBH kW	37 - 91 8.5 - 23.4	37 - 118 8.5 - 29.3
CSA output *	MBH kW	34 - 83 7.6 - 21	34 - 108 7.6 - 26.4
Efficiency (A.F.U.E.)	%	95.2	95.2
Altitude levels	ft. m	0 - 10,000 0 - 3,048	0 - 10,000 0 - 3,048
Overall dimensions
Depth	inches mm	14⅛ 360	14⅛ 360
Width	inches mm	15¾ 400	15¾ 400
Height	inches mm	28½ 725	28½ 725
Shipping weight	lbs kg	95 43	95 43

* Output based on 140ºF / 60ºC, 120ºF / 49ºC system supply/return temperature.

Viessmann CombiPLUS Kit for Vitodens 100-WB1B

Optional On Demand Domestic Hot Water Kit for Reliable DHW Without a Tank.

 

Buderus, the world's largest producer of cast iron boilers, manufactures high output hydronic steel panel radiators which are stocked in the U.S. Panel radiators produce an incredibly comfortable heat by providing both convected and radiant heat. Radiant heat warms objects rather than air, creating a greater sense of warmth faster and at lower room temperatures. Buderus radiators are designed to operate with individual thermostats.

The design and styling of Buderus radiators eliminates the noise associated with other heating systems and utilize less space than baseboard. Unique Buderus styling also minimizes area where dust and dirt can collect. All these features combine to offer you a cleaner, quieter, and more comfortable source of heat. All Buderus panel radiators are supplied in powder-enameled white. If you prefer, you can paint them any color you wish. Each panel includes side panels, grill covers and flowsetter valve.

**Note: BTU Output @ 180° F .

Because of the special nature of this product it does not qualify for free shipping and our website cannot quote the best freight. Please place your order on our website and we will contact you with freight options. Even better, call us to check availability and freight!