Details
Heat-Flo, Inc. is a full service design and manufacturing firm dedicated to providing high quality, cost effective solutions for hydronic, solar, and electric based hot water heating system applications, and hydronic and radiant heating applications. Heat-Flo originates all product design, manufacturing, sales, and ongoing market support at our facility in Uxbridge, Massachusetts, USA. Please inquire for more Product Detail.
Heat-Flo Products
HF-Stainless Steel Indirect Water Heaters
Heat-Flo Offers Quality Indirect Water Heating Systems that Provide Abundant Hot Water, Low Operating Cost and Long Life. Hot Water From Any Heating Boiler is Circulated Through the Coil Inside to Heat all the Water in the Tank. Simply Add Another Zone to Your Existing Heating Boiler.
Features and Benefits Include:
1.Quality Design and Construction
- Tanks and Coils are all Stainless Steel Construction
- Large Smooth Wall Coils Deliver Full Output for Years. No Finned Tubing to Collect Lime and Sediment
- Includes Over 2" of Insulation, Less than 1 Degree/hr Heat Loss, and Flexible Thermoplastic Jacket that will Not Dent or Corrode
2. Easy Installation
- All Connectors are on Top on the Standard Units for a Neat, Clean Installation
- Brass Drain and Relief Valves are Factory Installed
- Honeywell L4080B Aquastat Control is Standard
3.Residential and Commercial
- Models are Available with 30, 40, 50, 60, 80 and 115 Gallon Tanks
- Bank Together 80 and 115 Gallon Units for Applications with High Water Heating Demands
- Limited Lifetime Warranty Residential Installations, 5 Year Commercial
Hot Water Booster/Storage Tanks
Heat-Flo Offers Quality Well Insulated Hot Water Storage Tanks that Provide the Abundant Hot Water that Todays Homes Require. Homes with Multiple Baths, Hot Tubs and Body Sprays Increase the Requirement for the "Dump Loads" that Tankless Coils, Instantaneous Water Heaters, and Plate Heat Exchangers Can Not Provide. By Adding Hot Water Storage, the System Designer can Achieve an Energy Efficient Balance Between Heat Input and Storage by Taking Full Advantage of a High Efficiency Heat Source. The Result Will be Reduced Burner Cycling, and Abundant Hot Water.
Features and Benefits Include:
1.Quality Design and Construction
- All Stainless Steel
- R-12 Insulation, Less than 1 Deg. F/hr Heat Loss
- Flexible THermoplastic Jacket that will not Dent or Corrode
- Stainless Steel Dip Tubes
2.Easy Installation
- All Connections are on Top on the Standard Units. Connecting to a High Efficency Wall-Mounted Boiler or Instantaneous Water Heater is about as Easy as it Gets
- Units are Provided with Two Separate Connections for HEat Source Supply and Return, and an Aquastat. The Result is Excellent Temperature Control and No Guesswork. These Two Connections are Hydraulically Decoupled from Cold and Hot. High Water Draw Rates will not Effect the Circulator/Control Preformance
- Drain Valve and T+P Valve are Factory Installed
- Honeywell L4080B Control is Standard.
3.Residential and Commercial
- Models Available with 30, 40, 60, 80 and 115 Gallon Tanks
- Banking Together 80 and 115 Gallon Units for Applications with High Water Heating Demands
Solar Hot Water Storage Tanks
Solar Hot Water Storage Tanks are Made in 60, 80 and 115 Gallon Units. Units are Available with one Coil, Two Coils or No Coils. The Heat Exchanger Coils Can be Connected to the Solar Collectors. Units Without Coils can be Connected to External Brazed Plate Heat Exchangers. All Units are Available with or without Built in Electronic Backup.
Units with Electric Backup are Provided with a Heating Element, Thermostat, and Controls that can Heat the Tank if Solar Heat is not Available. All Units are Provided with a Removable Thermal Well to Accept the Solar Control Thermostats or Thermistor. All Electric Backup Units are Provided with a High Quality Low Watt Density 240 Volt AC, 3500 Watt Element.
Features and Benefits Include
Quality Design and Construction
- Tanks and Coils are all Stainless Steel
- Large Smooth Stainless Steel Coils, no Finned Tubing to Collect Lime and Sediment
- Includes over 2" of Insulation, Less than 1 deg/hr, R-12 +
- Thermoplastic Jacket will not Rust or Corrode
Easy Installation
- All Pipe Connections are on Top for a Neat, Clean Installation
- Brass Drain and Relief Valves are Factory Installed
- Includes Thermostat Well to Control Solar Input
- Large 4" X 10" Electrical Box with Pre-wired Heating Element, Thermostat and High Limit on Electric Backup Units
- Long Life, Low Watt Density Element
Hydronic Buffer Tanks
Application: Chillers/Heat Pumps/Low Mass Boilers
The Primary Application of a Buffer Tank is to Reduce Heat Pump, Chiller or Boiler Short Cycling. Hydronic Buffer Tanks are Used in Systems Operating Below the Design Load Condition, Which is most of the Time, or in Systems Having Several Low BTU Cooling or Heating Loads Calling at Different Times. This Can Cause the Chiller or Boiler to Short Cycle, Resulting in Reduced Operating Efficiency and Shorter Equipment Life.
Specify 1 1/4", 1/12" or 2" Connections.
The Hydronic Buffer Tanks are Built with 4 Connections. Two Connections Can be Piped to the Chiller or Boiler, and Two Connections can be Piped to the Distribution System. If Piped Correctly, the Tank Can Serve as Both a Thermal Buffer and a Hydraulic Separator, The Chiller or Boiler Can be Hydraulically Decoupled From the Distribution System. The Tanks are all Stainless Steel Construction with R-12 Insulation, and an ABS Jacket. Buffer Tanks are Available in 40, 60, 80 and 115 Gallon Capacities.