Search results for 'top line electric water heater'

Heat-Flo, Inc. is a full service design and manufacturing firm dedicated to providing high quality, cost effective solutions for hydronic, solar, and electric based hot water heating system applications, and hydronic and radiant heating applications. Heat-Flo originates all product design, manufacturing, sales, and ongoing market support at our facility in Uxbridge, Massachusetts, USA.  Please inquire for more Product Detail.

The gas pressure switch is mounted on the casing of the water heater adjacent to the heater's thermostat/gas control valve. It should be mounted close enough so that the supplied 1/4" tubing will reach from the gas pressure switch fitting to the thermostat/gas valve pressure tap port. The two provided screws are self-tapping and drilling. The screws do not require the use of a drill and their 1/2" length assures that the inner tank will not be penetrated

Grundfos UP10-16B5/TLC model (Grundfos SKU# 96433895) is a Bronze Comfort Series Pump with Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Grundfos Comfort series pumps, such as the UP10-16B5/TLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.

Zone valves are used to control hot and chilled water in heating and air conditioning systems. Coupled with an electro-thermal control actuator and managed by a room thermostat, they allow automatic on/off control of the hydronic circuit on which they are installed. Their special feature is their compact size and they can therefore be installed almost anywhere including baseboard or directly in fan-coil units.

The revolutionary Fernox Total Filter TF1 is a unique hydrocyclonic and magnetic in-line filter that removes and contains magnetic and non-magnetic contaminants from central heating systems. Easy to install with no additional parts needed, the Total Filter TF1 has also been designed as a dosing point for the Fernox 'F' range of chemical water treatment products to ensure the system's long lasting performance.

The new Fernox TF1 in-line filter can be connected directly onto 22mm and 28mm pipe work using the valve fittings provided and can be positioned flush to a wall in existing pipe work. Once installed, it can be cleaned in seconds and easily and without having to disassemble or remove the unit.

"The Fernox TF1 has been specifically developed to provide installers with an easy to fit filter that helps maintain the performance and longevity of a central heating system," explained Francine Wickham, European Marketing Director. "The hydrocyclonic and magnetic filters remove and contain contaminants so that the system can work effectively. The Fernox TF1 filter then provides an easy way for installers to dose the system for long term protection."

All Fernox TF1 filters are manufactured in the UK and each one tested so installers can be assured of performance and reliability every time.

Hydrocyclonic and magnetic in-line filter

• Unique action, removes all contaminants magnetic and non-magnetic
• Fits vertical and horizontal pipe work
• Dosing point for Fernox ‘F’ range products
• Cleaned in seconds without removal or disassembly
• Will not block or restrict flow
• All valves and fittings included

The Grundfos UP10-16B5/ATLC model is a Bronze Comfort Series Pump with Aquastat, Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Replaces old 96433896 model. Grundfos Comfort series pumps, such as the UP10-16B5/ATLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.

Wet rotor circulation pump, with flanged connection. (Flange parallel to shaft). Cast iron body for hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems.

Wet rotor circulation pump, with flanged connection. (Flange perpendicular to shaft). Cast iron body for hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems.

Grundfos UPS15-55SFC is a 1/8HP, 3-speed Stainless steel Circulator Pump with removalble Integral Check Valve and flanged connections. 3 speeds of the Grundfos UPS15-55SFC model make this pump very versatile and allow to match the system's requirements by adjusting the speeds (Low/Med/High), thus optimizing it's performance. Stainless steel body of the circulator resists corrosion and allows to use UPS15-55SFC model in a variety of applications ranging from open loop radiant and hot water recirculation, to closed loop hydronic heating and even chilled water cooling. This model also replaces a number of competitive models from Taco, Bell & Gosset, Wilo and others.