Hydronics

The revolutionary Fernox Total Filter TF1 is a unique hydrocyclonic and magnetic in-line filter that removes and contains magnetic and non-magnetic contaminants from central heating systems. Easy to install with no additional parts needed, the Total Filter TF1 has also been designed as a dosing point for the Fernox 'F' range of chemical water treatment products to ensure the system's long lasting performance.

The new Fernox TF1 in-line filter can be connected directly onto 22mm and 28mm pipe work using the valve fittings provided and can be positioned flush to a wall in existing pipe work. Once installed, it can be cleaned in seconds and easily and without having to disassemble or remove the unit.

"The Fernox TF1 has been specifically developed to provide installers with an easy to fit filter that helps maintain the performance and longevity of a central heating system," explained Francine Wickham, European Marketing Director. "The hydrocyclonic and magnetic filters remove and contain contaminants so that the system can work effectively. The Fernox TF1 filter then provides an easy way for installers to dose the system for long term protection."

All Fernox TF1 filters are manufactured in the UK and each one tested so installers can be assured of performance and reliability every time.

Hydrocyclonic and magnetic in-line filter

• Unique action, removes all contaminants magnetic and non-magnetic
• Fits vertical and horizontal pipe work
• Dosing point for Fernox ‘F’ range products
• Cleaned in seconds without removal or disassembly
• Will not block or restrict flow
• All valves and fittings included

Good practice dictates that hydronic central heating systems should be thoroughly cleaned and flushed before installing a new boiler, after which a chemical inhibitor should be added to ensure the system is protected from corrosion, scale and sludge build-up. These procedures should also be employed when major work is carried out on a system. A clean, protected system helps ensure that the heat generated by the boiler is transmitted efficiently into the house over the long term

• Maintain the design specification and energy efficiency
• Restore energy efficiency
• Inhibit the formation of scale and sludge
• Minimize corrosion of system metals
• Product code: 59480

Contents:

• 1 x Fernox Protector F1 17.6oz (500ml)
• 1 x Fernox Cleaner F3 17.6oz (500ml)
• 4 x Fernox pH Test Strips
• 1 x Fernox Protector Test Kit Instruction Leaflet

Good practice dictates that hydronic central heating systems should be thoroughly cleaned and flushed before installing a new boiler, after which a chemical inhibitor should be added to ensure the system is protected from corrosion, scale and sludge build-up. These procedures should also be employed when major work is carried out on a system. A clean, protected system helps ensure that the heat generated by the boiler is transmitted efficiently into the house over the long term

• Maintain the design specification and energy efficiency
• Restore energy efficiency
• Inhibit the formation of scale and sludge
• Minimize corrosion of system metals
• Product code: 59480

Contents:

• 1 x Fernox Protector F1 17.6oz (500ml)
• 1 x Fernox Cleaner F3 17.6oz (500ml)
• 4 x Fernox pH Test Strips
• 1 x Fernox Protector Test Kit Instruction Leaflet