Search results for 'Tankless water heaters'
-
DUOnex™ Cable
Connects two tankless water heaters for 2x the performanceRun your Paloma Tankless SOLO, or combine two units together for a Tankless DUO with 2X the performance.$25.00 -
Duravent PPS 36" Length Straight Pipe
36" Length of Polypropylene pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$13.10 -
Duravent PPS 36" Length Straight Pipe 2" Diameter
36" Length 2" Diameter Polypropylene pipe used for Venting Gas AppliancesPolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$13.10 -
Paloma Recessed Box
For use with PH2-25 and PH25 Tankless Water HeatersThe recessed box provides a clean finish to an outdoor installation -- a great look for residential installations.$189.00 -
Duravent PPS 90° Elbow
90° Elbow of Polypropylene pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$11.23 -
Water Valve Rebuild Kit
The Water Valve Rebuild Kit contains all the parts needed to replace the water control valve assembly.
For Paloma PH5, PH6, PH12/PH16/PH24 Tankless Water Heaters
The Water Valve Rebuild Kit contains all the parts needed to replace the water control valve assembly.
The water control valve assembly may need to be replaced when:
- Main burner will not turn on
- Main burner is on low flame
- Water is not hot enough, or as hot as usual
IN THE KIT
- Diaphragm
- “O” Ring
- Spindle
- Washers
- Retaining Clip
- Instructions
$45.00 -
Stiebel Eltron DHC-E 12
The ideal choice for supplying hot water to a single under-the-sink point of use, like a hand-washing sink in a garage or kitchen. 15% Off with Coupon!
The DHC-E tankless electric water heater differs from convention storage type water heaters in several ways. It does not store hot water. Instead, water is heated instantaneously as it flows through the unit. Due to the absence of stand-by losses, the DHC-E offers greater energy efficiency than storage type water heaters.
- Advanced flow control automaticall adjusts the flow of water
- Unlimited Supply of Hot Water
- Sleek Design Saves Space
- Adjustable Temperature Control
- Three Year Warranty
- Seismic Proof Construction
Medium electric tankless water heater — This heater will supply one low volume shower at a time and no other uses while the shower is in progress. We do sell larger capacity electric tankless water heaters (Stiebel Eltron DHC-E 20, DHC-E 30 and EEMAX Three Phase Industrial heaters).
The input of heat into the water is electronically controlled. The DHC-E tankless water heater will deliver any water temperature between 86 °F (30 °C) and 125 °F (52 °C). The desired temperature can be set using the knob on the front cover. The LED displays the temperature that the unit will produce.
The STIEBEL ELTRON DHC-E tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting:
- Office Buildings
- Gas Stations
- Stores
- Schools
- Malls
- Hotels/Motels
- Warehouses
- Restaurants
- Manufacturing Facilities
In a residential setting, they are ideally suited for the following applications:
- Bathroom Sinks
- Kitchen Sinks
- Laundry Areas
- Small Cabins
- Boats/RVs
For warm climate applications only. This water heater can run a shower when incoming water is 70°F.
MODELDHC-E 12 Phase1 VoltageV 208 240 WattagekW 9 12 AmperageA 44 50 Min. required circuit breaker sizeA 60 60 Recommended wire sizeAWG COPPER 6 6 Maximum temperature increase@0.75 GPM above ambient water temp.@0.75 GPM 66 87 @1.00 GPM 49 66 @1.50 GPM 41 54 Min. water flow to activate unitGPM / Lmin 0.37 / 1.4 WeightLb / Kg 5.9 / 2.7 Nominal water volumeGal / L 0.13 / 0.51 Working pressurePSI / BAR 150 / 10 Tested to PressurePSI / BAR 300 / 20 Water Connections½” NPT
$299.00 -
Paloma Recessed Box
FOR PALOMA/WAIWELA OUTDOOR TANKLESS WATER HEATERSThe Recessed Box provides a clean finish to an outdoor installation -- a great look for residential and commercial installs.
If purchased with a tankless water heater, then the Recessed Box is discounted to $275!$300.00 -
Duravent PPS Lochinvar Horizontal Termination Kit
Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14" pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. Available in 2" and 3" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$58.03 As low as: $48.98 -
Duravent PPS Lochinvar Horizontal Termination Kit 3" Diameter
Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14" pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. Available in 2" and 3" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$48.98