Search results for 'rebuild kit'
-
Caleffi NA35 SolarFlex Stainless Steel Insulated Pipe with Sensor Wire
Caleffi NA35 SolarFlex Stainless Steel Insulated PipeSolarFlex™ stainless steel piping with EPDM insulation. Used to connect solar collector with storage tank. Integrated sensor cable saves time and reduces cost. Packaged in a 50 foot continuous coil ensures a leak-free installation. Max. working pressure: 150 psi. Max. fl uid temperature: 350ºF. Min. surface temperature: -60ºF. Min. bend radius: 5". Flammability: Class VO. Flame spread/smoke density: 25/50 Agency approvals: ASTM D 635 ASTM C 177 Includes fi tting kit.$590.36 -
Caleffi Series NA267 Dual Sweat Kit Fitting 3/4" Male Thread by 3/4" Sweat Fitting
Pump Station FittingsCaleffi Series NA267 Dual Sweat Kit Fitting 3/4" Male Thread by 3/4" Sweat Fitting$83.13 -
Caleffi Series NA266 1" SolarFlex Direct to Top or Bottom Kit
Pump Station FittingsCaleffi Series NA266 1" SolarFlex Direct to Top or Bottom Kit$47.24 -
Viessmann Vitodens 100-WB1B Gas Boilers, Optional CombiPLUS Kit
Viessmann Vitodens 100-WB1B Gas Boilers, Optional CombiPLUS KitViessmann Vitoden Gas Boilers
100-W Gas Fired Wall-Mounted Condensing Boiler with Modulating Stainless Steel Cylinder Burner and Inox-Radial Heat Exchanger Service.
Model WB1B 26 WB1B 35 CSA input MBH
kW37 - 91
8.5 - 23.437 - 118
8.5 - 29.3CSA output * MBH
kW34 - 83
7.6 - 2134 - 108
7.6 - 26.4Efficiency (A.F.U.E.) % 95.2 95.2 Altitude levels ft.
m0 - 10,000
0 - 3,0480 - 10,000
0 - 3,048Overall dimensions Depth inches
mm14⅛
36014⅛
360Width inches
mm15¾
40015¾
400Height inches
mm28½
72528½
725Shipping weight lbs
kg95
4395
43
* Output based on 140ºF / 60ºC, 120ºF / 49ºC system supply/return temperature.Viessmann CombiPLUS Kit for Vitodens 100-WB1B
Optional On Demand Domestic Hot Water Kit for Reliable DHW Without a Tank.
-
Duravent PPS Lochinvar Horizontal Termination Kit
Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14" pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. Available in 2" and 3" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$58.03 As low as: $48.98 -
Metlund D'MAND Systems STS-02T
Water Recirculation SystemThe Metlund D'MAND® System consists of an electronically controlled pump and valve assembly that allows for the rapid delivery of hot water to plumbing fixtures without the loss of cold water down the drain. ***Available with Plumbing Fitting Kit when ordered as "PF" model.***$753.50 -
Metlund D'MAND Systems STS-70T
Water Recirculation SystemThe Metlund D'MAND® System consists of an electronically controlled pump and valve assembly that allows for the rapid delivery of hot water to plumbing fixtures without the loss of cold water down the drain. ***Available with Plumbing Fitting Kit when ordered as "PF" model.***$427.25 -
Tjernlund GPAK-J Side Wall Vent System
4" Diameter Vent System for up 150k BTU-
-
All operating components located indoors for weather
-
Capacities up to 250,000 BTU/hr.
-
Accommodates vent pipe runs up to 100 equivalent feet.
-
Regulated, consistent draft throughout burner cycle.
-
Built-in Fan Proving Switch interlocks with gas valve.
-
Available with 24-volt Relay or Post Purge Timer/Relay.
-
Kit includes everything needed for installation, except vent pipe. (*GPAK* includes DC-4 Draft Control)
-
Durable, heavy-duty aluminum Vent Hood.
-
AGA design certified for gas furnaces, boilers, pool
- heaters, unit heaters and commercial water heaters.
-
$199.00 -
-
Tjernlund Spill Switch Kit
Gas Spill Switch KitThis Safety Interlock System may be used on conventional chimney or Power Vented appliances equipped with a draft hood, draft diverter or draft control. It's purpose is to provide a means for appliance shut-down in the event of flue blockage or down drafts. The Spill Switch circuits are “normally closed” and will not affect normal appliance operation. When concentrated spillage of combustion gases occurs from the draft hood, diverter or barometric control, the Spill Switch circuit will open preventing burner operation. ***WARNING*** The 24SP200 Flue Gas Spillage Sensing Kit is designed to alert the user to a potentially hazardous condition. It is not designed to, and cannot replace regular chimney inspection, appliance servicing and combustion testing. DO NOT USE THE 24SP200 AS A SUBSTITUTE FOR PROFESSIONAL APPLIANCE MAINTENANCE.$84.00 -
Stiebel Eltron [DHC-E 8/10]
The ideal choice for supplying hot water to a single under-the-sink point of use, like a hand-washing sink in a garage or kitchen. 15% Off with Coupon! THIS UNIT QUALIFIES FOR FREE SHIPPINGThe DHC-E tankless electric water heater differs from conventional storage type water heaters in several ways. It does not store hot water. Instead, water is heated instantaneously as it flows through the unit. Due to the absence of stand-by losses, the DHC-E offers greater energy efficiency than storage type water heaters.$289.00