Watts Radiant 1/2" Swedged Manifolds Open Ended with Mini Ball Valve
Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Watts Radiant 1/2" Swedged Manifolds Open Ended with Mini Ball Valve
Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Watts Radiant 1/2" Swedged Manifolds with Mini Ball Valves
Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Watts Radiant 3/8" Swedged Manifolds Open Ended with Mini Ball Valve
Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Wilo Lead-Free Bronze Circulator Pump - Star-Z-BS7
WaiWela 6-Gallon Mini Tank - WM-6.0
Use WM-6.0 and Wilo Pump as the heat source for your domestic recirculation system. Only circulate through the mini tank, extending the life of your tankless water heater by not subjecting it to constant recirculation. Use WM-6.0 as a buffer tank to eliminate cold water sandwich, which is possible with frequent on/off operation of the tankless. Cold water, sandwiched between hot water, is diluted into the mini tank and eliminated.
Seal-less magnetic drive circulator with union or solder connection. Jet Connect fitting pack included. Compact, magnetic drive design. Six inch power cord included. Optional timer available. Domestic hot water re-circulation systems. NSF approved for drinking water applications. Recirulate using WaiWela WM-6.0 Mini Tank.
Watts Radiant 1/2" Swedged Manifolds with Mini Ball Valves
Swedged Manifolds are Easy to Stock and Easy to Assemble. These 1" Copper Manifolds are Closed at one End and Swedged at the Other. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Watts Radiant 1/2" Swedged Manifolds with Mini Ball Valves
Swedged Manifolds are Easy to Stock and Easy to Assemble. These 1" Copper Manifolds are Closed at one End and Swedged at the Other. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Watts Radiant 1/2" Swedged Manifolds with Mini Ball Valves
Swedged Manifolds are Easy to Stock and Easy to Assemble. These 1" Copper Manifolds are Closed at one End and Swedged at the Other. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Swedged Manifolds are Easy to Stock and Easy to Assemble. These 1" Copper Manifolds are Closed at one End and Swedged at the Other. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
