Search results for 'residential energy credit'
-
Stiebel Eltron DHC-E 12
The ideal choice for supplying hot water to a single under-the-sink point of use, like a hand-washing sink in a garage or kitchen. 15% Off with Coupon!
The DHC-E tankless electric water heater differs from convention storage type water heaters in several ways. It does not store hot water. Instead, water is heated instantaneously as it flows through the unit. Due to the absence of stand-by losses, the DHC-E offers greater energy efficiency than storage type water heaters.
- Advanced flow control automaticall adjusts the flow of water
- Unlimited Supply of Hot Water
- Sleek Design Saves Space
- Adjustable Temperature Control
- Three Year Warranty
- Seismic Proof Construction
Medium electric tankless water heater — This heater will supply one low volume shower at a time and no other uses while the shower is in progress. We do sell larger capacity electric tankless water heaters (Stiebel Eltron DHC-E 20, DHC-E 30 and EEMAX Three Phase Industrial heaters).
The input of heat into the water is electronically controlled. The DHC-E tankless water heater will deliver any water temperature between 86 °F (30 °C) and 125 °F (52 °C). The desired temperature can be set using the knob on the front cover. The LED displays the temperature that the unit will produce.
The STIEBEL ELTRON DHC-E tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting:
- Office Buildings
- Gas Stations
- Stores
- Schools
- Malls
- Hotels/Motels
- Warehouses
- Restaurants
- Manufacturing Facilities
In a residential setting, they are ideally suited for the following applications:
- Bathroom Sinks
- Kitchen Sinks
- Laundry Areas
- Small Cabins
- Boats/RVs
For warm climate applications only. This water heater can run a shower when incoming water is 70°F.
MODELDHC-E 12 Phase1 VoltageV 208 240 WattagekW 9 12 AmperageA 44 50 Min. required circuit breaker sizeA 60 60 Recommended wire sizeAWG COPPER 6 6 Maximum temperature increase@0.75 GPM above ambient water temp.@0.75 GPM 66 87 @1.00 GPM 49 66 @1.50 GPM 41 54 Min. water flow to activate unitGPM / Lmin 0.37 / 1.4 WeightLb / Kg 5.9 / 2.7 Nominal water volumeGal / L 0.13 / 0.51 Working pressurePSI / BAR 150 / 10 Tested to PressurePSI / BAR 300 / 20 Water Connections½” NPT
$299.00 -
Webstone Sweat Isolator Flanges-1"
Webstone Sweat Isolator Flanges 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"Webstone Isolation Flanges are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The forged brass body and flange provide strength and versatility for any application where a pipe and flange meet. This approved Webstone valve features a solid hard chrome plated brass ball with reinforced Teflon seats and a blowout proof stem sealed with Teflon and an adjustable packing gland. Additional wing style "T" handle included with mounting nuts and bolts.$21.18 -
Webstone Sweat Isolator Flanges-1 -1/4"
Webstone Sweat Isolator Flanges 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"Webstone Isolation Flanges are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The forged brass body and flange provide strength and versatility for any application where a pipe and flange meet. This approved Webstone valve features a solid hard chrome plated brass ball with reinforced Teflon seats and a blowout proof stem sealed with Teflon and an adjustable packing gland. Additional wing style "T" handle included with mounting nuts and bolts.$25.38 -
Webstone Sweat Isolator Flanges-1-1/2"
Webstone Sweat Isolator Flanges 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"Webstone Isolation Flanges are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The forged brass body and flange provide strength and versatility for any application where a pipe and flange meet. This approved Webstone valve features a solid hard chrome plated brass ball with reinforced Teflon seats and a blowout proof stem sealed with Teflon and an adjustable packing gland. Additional wing style "T" handle included with mounting nuts and bolts.$36.62 -
Webstone Sweat Isolator Flanges-2"
Webstone Sweat Isolator Flanges 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"Webstone Isolation Flanges are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The forged brass body and flange provide strength and versatility for any application where a pipe and flange meet. This approved Webstone valve features a solid hard chrome plated brass ball with reinforced Teflon seats and a blowout proof stem sealed with Teflon and an adjustable packing gland. Additional wing style "T" handle included with mounting nuts and bolts.$48.58 -
Webstone Sweat Isolator Flange with Drain
Webstone Sweat Isolator Flange with Drain 3/4", 1", 1-1/4", 1-1/2" and 2"Webstone Isolation Flanges with Drain are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The unitary construction of the brass body and flange provide strength and versatility for any application where a pipe and flange meet. This valve is the only choice to use in a closed system where a large port drain and fill valve is required.Additional wing style "T" handle included with mounting nuts and bolts.$26.58 -
Webstone Sweat Isolator Flange with Drain-3/4"
Webstone Sweat Isolator Flange with Drain 3/4", 1", 1-1/4", 1-1/2" and 2"Webstone Isolation Flanges with Drain are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The unitary construction of the brass body and flange provide strength and versatility for any application where a pipe and flange meet. This valve is the only choice to use in a closed system where a large port drain and fill valve is required.Additional wing style "T" handle included with mounting nuts and bolts.$26.58 -
Webstone Sweat Isolator Flange with Drain-1"
Webstone Sweat Isolator Flange with Drain 3/4", 1", 1-1/4", 1-1/2" and 2"Webstone Isolation Flanges with Drain are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The unitary construction of the brass body and flange provide strength and versatility for any application where a pipe and flange meet. This valve is the only choice to use in a closed system where a large port drain and fill valve is required.Additional wing style "T" handle included with mounting nuts and bolts.$32.34 -
Webstone Sweat Isolator Flange with Drain-1 -1/4"
Webstone Sweat Isolator Flange with Drain 3/4", 1", 1-1/4", 1-1/2" and 2"Webstone Isolation Flanges with Drain are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The unitary construction of the brass body and flange provide strength and versatility for any application where a pipe and flange meet. This valve is the only choice to use in a closed system where a large port drain and fill valve is required.Additional wing style "T" handle included with mounting nuts and bolts.$40.83 -
Webstone Sweat Isolator Flanges-3/4"
Webstone Sweat Isolator Flanges 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"Webstone Isolation Flanges are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The forged brass body and flange provide strength and versatility for any application where a pipe and flange meet. This approved Webstone valve features a solid hard chrome plated brass ball with reinforced Teflon seats and a blowout proof stem sealed with Teflon and an adjustable packing gland. Additional wing style "T" handle included with mounting nuts and bolts.$17.46