Air separator with automatic ½" check
valve (code 561402A) to mount expansion
tank on bottom thread.
Brass body.
Glass reinforced nylon internal element.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Air separator.
Brass body.
Stainless steel mesh internal element.
½" NPT bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Air separators are used to continuously remove the air contained in the
hydronic circuits of heating and cooling systems. The air discharge
capacity of these devices is very high. They are capable of removing
automatically all the air present in the system down to micro-bubble level.
The circulation of fully de-aerated water enables the equipment to operate
under optimum conditions, free from any noise, corrosion, localized
overheating or mechanical damage. Micro-bubbles, fuse together,
increase in volume until they become large enough to rise to the top where
they are automatically released.
Universal Flow Switch for heating systems. 1" NPTM, Brass body, Suitable for 1" to 8" pipe. UL listed.
Universal Flow Switch for heating and air conditioning systems. Suitable for 1" to 8" pipe size. Working pressure: 150 psi. Working Temperature: 250 F. Minimum Flow: 5.7 GPM. Rating of switch contacts : 5A. CE, cUL, NEMA Type 5, IP 54
Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
