72" Length of Polypropylene pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.
PolyPro is a polypropylene vent pipe for use with ANSI Category II
and IV gas burning appliances, including tankless and storage water
heaters, high-efficiency water heaters, condensing boilers and warm
air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in
Canada and is rated as a Class IIA, IIB and IIC vent system suitable for
exhaust temperatures up to 230°F / 110°C, and a maximum positive
pressure of 15 in-w.c.
Polypropylene Flex Coupler Adapter for use with Venting Gas Appliances. Use to tightly connect one length of PolyPro flex to another. Flex gasket included. Available in 2", 3", 4", and 5" diameter.
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Polypropylene Flex Coupler Adapter for use with Venting Gas Appliances. Use to tightly connect one length of PolyPro flex to another. Flex gasket included. Available in 2", 3", 4", and 5" diameter.
PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
Watts Radiant 1/2" Swedged Manifolds with Mini Ball Valves
Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Watts Radiant 1/2" Swedged Manifolds with Mini Ball Valves
Swedged Manifolds are Easy to Stock and Easy to Assemble. These 1" Copper Manifolds are Closed at one End and Swedged at the Other. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
