Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Air separator.
Brass body.
Glass reinforced nylon internal element.
½" NPT female bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
The zero leakage high temperature zone valve body Z2 series is 2-way straight
through and the valve body Z3 series is 3-way diverting. The Z1 series
actuator is easily attached by a push button lock and without tools.
The high temperature and high close-off performance characteristics of these
zone valves, combined with the compact size, makes them suitable to fit inside
baseboard or directly in fan coil units.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
The zero leakage high temperature zone valve body Z2 series is 2-way straight
through and the valve body Z3 series is 3-way diverting. The Z1 series
actuator is easily attached by a push button lock and without tools.
The high temperature and high close-off performance characteristics of these
zone valves, combined with the compact size, makes them suitable to fit inside
baseboard or directly in fan coil units.
Wilo Top S 1.5 by 30 Wet Rotor Hydronics Circulating Pump, 115-Volt
Wilo Top S 1.5 x 30 Two Speed Pump 115VThis pump is made from combination of stainless steel, polypropylene and metal impregnated carbon. It's main feature is the 2 speed motor. This is a wet rotor - "seal less" design type pump. Great for residential and light commercial applicationsPermitted temperature range -20° C to +130° C, in short-term operation (2h) to +140° CPre-selectable speed stages for manual capacity adjustmentPump communication based on simple plug technology that can be reliably retrofittedCombination flanges PN6/ PN10 (DN 40 to DN 65)Cataphoretic coated pump housingThermal insulation shell as standardAutomatically VentedExtensible motor protection, signal and display functions1/4" suction and discharge gauge tappingsFor all hot-water heating systems, air-conditioning systems and closed cooling circuitsFlanges are not inculded.Specifications
The Grundfos UP10-16B5/ATLC model is a Bronze Comfort Series Pump with Aquastat, Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Replaces old 96433896 model.
Grundfos Comfort series pumps, such as the UP10-16B5/ATLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.
Grundfos UP15-18B7/LC, Circulator Pump, 115V 9H Our Hot Water Recirculation systems save you time, money, and energy, by circulating hot water through your household plumbing without wasting it down the drain. Grundfos has a recirculation that is perfect for your new home! Grundfos 59896229 UP15-18B7/LC, Circulator Pump, 115V 9H Features: Built-in motor protection for long life Stainless steel construction for corrosion resistance Multiple accessories for a variety of applications Whisper-quiet operation for sound sensitive installations
Grundfos UP10-16B5/TLC Pump, 1/2" Sweat, 115V, Timer & Line Cord
Grundfos UP10-16B5/TLC model (Grundfos SKU# 96433895) is a Bronze Comfort Series Pump with Timer, Line Cord and has 1/2” sweat inlet/outlet connections.
Grundfos Comfort series pumps, such as the UP10-16B5/TLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.
Grundfos UP15-29SU model circulator incorporates a stainless steel body design and 1-1/4" union connection, smaking it suitable for a wide range of open and closed loop radiant heating, hydronic heating, hot water recirculation, solar & other applications.
