Search results for 'PALOMA WATER HEATER PH-5-3F'
-
Metalfab Vent Pipe 12" Length for Paloma PH2, PH20 and PH25 Direct Vent Models
12" Stainless Steel Vent Length12" Length of 3"/5" concentric vent pipe for Paloma PH2, PH20 and PH25 Direct Vent Models$30.26 -
Metalfab 10' Condensate Tubing Kit for Paloma PH2, PH20 and PH25 Direct Vent Models
10' Tubing KitCondensate tubing kit. 10 foot length for Paloma PH2, PH20 and PH25 Direct Vent Models.$23.12 -
Duravent PPS 72" Length Straight Pipe 3" Diameter
72" Length of Polypropylene pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$28.08 -
Duravent PPS 90° Elbow UV Black
90° Elbow of UV Resistant Polypropylene pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$14.04 -
Duravent PPS Wall Strap 3" Diameter
Use to support for offsets, vertical and horizontal runs. Clicks in place. Anchor Bolt included. Supporting Wall Straps are required for at least every 10ft (3 meters) for vertical vent pipe sections, and horizontal or sloped sections of vent pipe require one supporting wall strap for each pipe section. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$11.91 -
Metalfab Flashing 2/12 to 5/12 Pitch for Paloma PH2, PH20 and PH25 Direct Vent Models
Flashing: 2/12 to 5/12 pitchFlashing: 2/12 to 5/12 pitch$23.34 -
Metalfab Vent Pipe 94 Degree Elbow for Paloma PH2, PH20 and PH25 Direct Vent Models
Stainless Steel 94 degree elbow94 degree elbow 3"/5" concentric vent pipe for Paloma PH2, PH20 and PH25 Direct Vent Models.$59.89 -
Duravent PPS 12" Length Straight Pipe 3" Diameter
12" Length of Polypropylene Vent Pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
$8.19 -
Duravent PPS 45° Elbow
45° Elbow of Polypropylene pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$11.23 -
Duravent PPS Lochinvar Horizontal Termination Kit
Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14" pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. Available in 2" and 3" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$58.03 As low as: $48.98