Search results for 'takagi tk 3'
-
Duravent PPS Lochinvar Horizontal Termination Kit
Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14" pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. Available in 2" and 3" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$58.03 As low as: $48.98 -
Metalfab Plate Support & Firestop for Paloma PH2, PH20 and PH25 Direct Vent Models
Stainless Steel Plate Support & FirestopPlate Support & Firestop for Paloma PH2, PH20 and PH25 Direct Vent Models$49.05 -
Metalfab Horizontal Termination for Paloma PH2, PH20 and PH25 Direct Vent Models
2.5" Stainless Steel Horizontal Termination3"/5" concentric vent pipe horizontal termination. 2.5" Length for Paloma PH2, PH20 and PH25 Direct Vent Models$30.03 -
FasNSeal PH-20 Appliance Adapter (3" Diameter)
PH-20 Appliance Adapter (3" Diameter)Made from AL29-4C Corrosion Resistant Stainless Steel. 3" Diameter$49.70 -
FasNSeal Variable Pitch Flashing Kit For PH-20 Series (3" Diameter)
For PH-20 Series (3" Diameter)Flat to 9/12 Made from AL29-4C Corrosion Resistant Stainless Steel. 3" Diameter$208.32 -
Duravent PPS 12" Length Straight Pipe 3" Diameter
12" Length of Polypropylene Vent Pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
$8.19 -
Duravent PPS 45° Elbow
45° Elbow of Polypropylene pipe for use with Venting Gas Appliances. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$11.23 -
Duravent PPS Wall Strap
Use to support for offsets, vertical and horizontal runs. Clicks in place. Anchor Bolt included. Supporting Wall Straps are required for at least every 10ft (3 meters) for vertical vent pipe sections, and horizontal or sloped sections of vent pipe require one supporting wall strap for each pipe section. Available in 2", 3", and 4" diameter.PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.$11.85 -
Metalfab Vent Pipe 18" Length for Paloma PH2, PH20 and PH25 Direct Vent Models
18" Stainless Steel Vent Length18" Length of 3"/5" concentric vent pipe for Paloma PH2, PH20 and PH25 Direct Vent Models$40.71 -
FasNSeal Variable Pitch Flashing Kit for All Fan Assisted Gas Appliances Flat to 9/12 (4" Diameter)
for All Fan Assisted Gas Appliances Flat to 9/12 (4" Diameter)Made from AL29-4C Corrosion Resistant Stainless Steel. 4" Diameter$218.39