Two-way on/off two position valve.
Straight through flow pattern.
Brass body.*
Stainless steel stem.
EPDM rubber seals and paddle.
Max. working pressure: 300 psi.
Max temperature: 240°F.
*Agency Approval for low-lead brass body:
Lead plumbing law compliance: (0.25 max.
weighted average lead content).
Lead plumbing law certified by IAPMO R&T
Webstone Isolation Flanges are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The forged brass body and flange provide strength and versatility for any application where a pipe and flange meet. This approved Webstone valve features a solid hard chrome plated brass ball with reinforced Teflon seats and a blowout proof stem sealed with Teflon and an adjustable packing gland. Additional wing style "T" handle included with mounting nuts and bolts.
Adjustable thermostatic and pressure
balanced mixing valve for point of
distribution in domestic water systems
and radiant hydronic heating systems.
Low-lead brass body.
Internal anti-scale materials.
Locking set point knob.
Max. working pressure: 200 psi.
Max. inlet temperature: 200ºF.
Adjustable range: 85—150ºF.
Gauge scale: 30—210ºF.
Gauge accuracy: ± 6ºF.
Gauge dial: 2" diameter.
ASSE 1017 Listed.
Lead Plumbing Law Compliance:
(0.25% Max. weighted average lead
content).
Lead Plumbing Law Certified by
IAPMO R&T.
The thermostatic mixer is used in systems producing domestic hot water or in radiant panel heating systems. Its function is to maintain the temperature of the mixed water supplied to the user constant at the set value when there are variations in the supply conditions of the incoming hot and cold water.
The valve has been specifically certified to ASSE 1017.
Grundfos 3-Speed 1/6 Horsepower Circulator Pump with Flow Check
The Grundfos UPS26-99FC is a 3-speed cast iron circulator pump with built-in flow check. 3 speeds (Low/Med/High) of the Grundfos UPS26-99FC make this model very versatile and allow to use it in a large variety of heating applications inlcuding radiant, hydronic, radiators, fan coils, etc. A built-in flow check eliminates the need to buy and install a separate in-line check valve. This circulator is designed for closed loop systems with medium to high flow rates and pressure drops. A built-in automatic resetting thermal protection of the pump assures motor safety and extends circulator's life.
Air separator.
Brass body.
Stainless steel mesh internal element.
½" NPT bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Air separators are used to continuously remove the air contained in the
hydronic circuits of heating and cooling systems. The air discharge
capacity of these devices is very high. They are capable of removing
automatically all the air present in the system down to micro-bubble level.
The circulation of fully de-aerated water enables the equipment to operate
under optimum conditions, free from any noise, corrosion, localized
overheating or mechanical damage. Micro-bubbles, fuse together,
increase in volume until they become large enough to rise to the top where
they are automatically released.
The Grundfos UP10-16B5/ATLC model is a Bronze Comfort Series Pump with Aquastat, Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Replaces old 96433896 model.
Grundfos Comfort series pumps, such as the UP10-16B5/ATLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.
