Search results for 'tankless water heater model 91rs'
-
Grundfos UP10-16B5/TLC 115V Pump
Grundfos UP10-16B5/TLC Pump, 1/2" Sweat, 115V, Timer & Line CordGrundfos UP10-16B5/TLC model (Grundfos SKU# 96433895) is a Bronze Comfort Series Pump with Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Grundfos Comfort series pumps, such as the UP10-16B5/TLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.$230.88 -
Grundfos UP26-120 U 1/6 HP 115V Circulating Pump
Grundfos 1/6 HP 115V Circulating Pump Cast Iron BodyThe Grundfos UP26-120 U is a cast iron circulator pump for closed circulation of water. The Grundfos model utilizes a two-pole, single phase motor at 1/6 (0.16) HP and produces a flow range of 0-19 GPM and a head range of 0-38 ft. The Grundfos UP26-120 U circulator pump functions at 115V, 2.15 Amp, and 60Hz, and has a maximum pressure of 145 PSI. The optimal water temperature for this Grundfos circulator pump model is within the 32-203 F range. The Grundfos UP26-120 U circulator pump utilizes a 1-1/4 inch union connection.$269.88 -
Grundfos UP15-29SU Stainless Steel Circulator Pump
Grundfos UP15-29SU Stainless Steel Circulator Pump, 1-1/4" Union, 1/6HP, 115VGrundfos UP15-29SU model circulator incorporates a stainless steel body design and 1-1/4" union connection, smaking it suitable for a wide range of open and closed loop radiant heating, hydronic heating, hot water recirculation, solar & other applications.$196.04 -
Grundfos UPS15-35SFC 3-Speed Stainless Steel Circulator Pump
Grundfos UPS15-35SFC 3-Speed Stainless Steel Circulator Pump, w IFC, 1/6HP, 115VGrundfos UPS15-35SFC is a 1/6HP, 3-Speed Circulator Pump with stainless steel housing, suitable for a wide range of open loop and closed loop applications, including radiant heating, hydronic heating, solar, hot water recirculation, chilled water cooling and many others. 3 speeds of the Grundfos UPS15-35SFC model allow to adjust pump's parameters to match system requirements and achieve optimal performance.$267.80 -
Grundfos UP10-16B5/ATLC Pump
Grundfos UP10-16B5/ATLC Pump, 1/2" Sweat, 115V, Aquastat, Timer & Line CordThe Grundfos UP10-16B5/ATLC model is a Bronze Comfort Series Pump with Aquastat, Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Replaces old 96433896 model. Grundfos Comfort series pumps, such as the UP10-16B5/ATLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.$247.52 -
Tjernlund Gas Pressure Switch
Gas Pressure SwitchThe gas pressure switch is mounted on the casing of the water heater adjacent to the heater's thermostat/gas control valve. It should be mounted close enough so that the supplied 1/4" tubing will reach from the gas pressure switch fitting to the thermostat/gas valve pressure tap port. The two provided screws are self-tapping and drilling. The screws do not require the use of a drill and their 1/2" length assures that the inner tank will not be penetrated$86.00 -
Grundfos UPS15-55SFC 3-Speed Stainless Steel Circulator Pump
Grundfos UPS15-55SFC 3-Speed Stainless Steel Circulator Pump w/ IFC, 1/8HP, 115VGrundfos UPS15-55SFC is a 1/8HP, 3-speed Stainless steel Circulator Pump with removalble Integral Check Valve and flanged connections. 3 speeds of the Grundfos UPS15-55SFC model make this pump very versatile and allow to match the system's requirements by adjusting the speeds (Low/Med/High), thus optimizing it's performance. Stainless steel body of the circulator resists corrosion and allows to use UPS15-55SFC model in a variety of applications ranging from open loop radiant and hot water recirculation, to closed loop hydronic heating and even chilled water cooling. This model also replaces a number of competitive models from Taco, Bell & Gosset, Wilo and others.$281.32 -
Grundfos UPS26-99BFC Brute Three Speed Bronze 1/6 Horsepower Recirculator Pump
Grundfos Brute Three Speed Bronze Recirculator PumpThe Grundfos UPS26-99BFC (52722518) model incorporates a three speed motor for increased versatility, a built-in check valve and a bronze housing for ehnaced corrosion resistance. The wet rotor design allows it to be virtually silent while operating, while built-in motor protection assures long life of the circulator. Performance parameters (flow rates and pressure drop) of the Grundfos UPS26-99BFC model make it well suited for a wide range of applications, from radiant and hydronic heating, to domestic hot water recirculatio, solar, chilled water cooling and many others.$408.72 -
Caleffi Discal Series 551 Air Separators Brass Sweat
Air separator. Brass body. Glass reinforced nylon internal element. ½" NPT female bottom thread. Max. working pressure: 150 psi. Working temperature range: 32—250°F.In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.$91.57 -
Fernox Total 1" Magnetic Debris Filter
Fernox Total 1" Magnetic Debris FilterThe revolutionary Fernox Total Filter TF1 is a unique hydrocyclonic and magnetic in-line filter that removes and contains magnetic and non-magnetic contaminants from central heating systems. Easy to install with no additional parts needed, the Total Filter TF1 has also been designed as a dosing point for the Fernox 'F' range of chemical water treatment products to ensure the system's long lasting performance.
The new Fernox TF1 in-line filter can be connected directly onto 22mm and 28mm pipe work using the valve fittings provided and can be positioned flush to a wall in existing pipe work. Once installed, it can be cleaned in seconds and easily and without having to disassemble or remove the unit.
"The Fernox TF1 has been specifically developed to provide installers with an easy to fit filter that helps maintain the performance and longevity of a central heating system," explained Francine Wickham, European Marketing Director. "The hydrocyclonic and magnetic filters remove and contain contaminants so that the system can work effectively. The Fernox TF1 filter then provides an easy way for installers to dose the system for long term protection."
All Fernox TF1 filters are manufactured in the UK and each one tested so installers can be assured of performance and reliability every time.
Hydrocyclonic and magnetic in-line filter
- Unique action, removes all contaminants magnetic and non-magnetic
- Fits vertical and horizontal pipe work
- Dosing point for Fernox ‘F’ range products
- Cleaned in seconds without removal or disassembly
- Will not block or restrict flow
- All valves and fittings included
$250.97