Search results for 'rebuild kit'

• 1-1/2-Inch HV FNPT flange kit
• 2 flanges
• 4 nuts
• 4 bolts
• 2 gaskets

RadiantPEX-AL Manual PressAll Tool Kit For Pressing Stainless Steel Sleeves over RadiantPEX-AL Tubing and Fittings

Viessmann Vitoden Gas Boilers

 100-W Gas Fired Wall-Mounted Condensing Boiler with Modulating Stainless Steel Cylinder Burner and Inox-Radial Heat Exchanger Service.

 

Model		WB1B 26	WB1B 35
CSA input	MBH kW	37 - 91 8.5 - 23.4	37 - 118 8.5 - 29.3
CSA output *	MBH kW	34 - 83 7.6 - 21	34 - 108 7.6 - 26.4
Efficiency (A.F.U.E.)	%	95.2	95.2
Altitude levels	ft. m	0 - 10,000 0 - 3,048	0 - 10,000 0 - 3,048
Overall dimensions
Depth	inches mm	14⅛ 360	14⅛ 360
Width	inches mm	15¾ 400	15¾ 400
Height	inches mm	28½ 725	28½ 725
Shipping weight	lbs kg	95 43	95 43

* Output based on 140ºF / 60ºC, 120ºF / 49ºC system supply/return temperature.

Viessmann CombiPLUS Kit for Vitodens 100-WB1B

Optional On Demand Domestic Hot Water Kit for Reliable DHW Without a Tank.

 

•  
• All operating components located indoors for weather
• Capacities up to 250,000 BTU/hr.
• Accommodates vent pipe runs up to 100 equivalent feet.
• Regulated, consistent draft throughout burner cycle.
• Built-in Fan Proving Switch interlocks with gas valve.
• Available with 24-volt Relay or Post Purge Timer/Relay.
• Kit includes everything needed for installation, except vent pipe. (*GPAK* includes DC-4 Draft Control)
• Durable, heavy-duty aluminum Vent Hood.
• AGA design certified for gas furnaces, boilers, pool
• heaters, unit heaters and commercial water heaters.
• 
   

 

This Safety Interlock System may be used on conventional chimney or Power Vented appliances equipped with a draft hood, draft diverter or draft control. It's purpose is to provide a means for appliance shut-down in the event of flue blockage or down drafts. The Spill Switch circuits are “normally closed” and will not affect normal appliance operation. When concentrated spillage of combustion gases occurs from the draft hood, diverter or barometric control, the Spill Switch circuit will open preventing burner operation. ***WARNING*** The 24SP200 Flue Gas Spillage Sensing Kit is designed to alert the user to a potentially hazardous condition. It is not designed to, and cannot replace regular chimney inspection, appliance servicing and combustion testing. DO NOT USE THE 24SP200 AS A SUBSTITUTE FOR PROFESSIONAL APPLIANCE MAINTENANCE.

Replacement Radiator Fitting for 5/8" KITEC

Replacement Radiator Fitting for 1/2" KITEC

Good practice dictates that hydronic central heating systems should be thoroughly cleaned and flushed before installing a new boiler, after which a chemical inhibitor should be added to ensure the system is protected from corrosion, scale and sludge build-up. These procedures should also be employed when major work is carried out on a system. A clean, protected system helps ensure that the heat generated by the boiler is transmitted efficiently into the house over the long term

• Maintain the design specification and energy efficiency
• Restore energy efficiency
• Inhibit the formation of scale and sludge
• Minimize corrosion of system metals
• Product code: 59480

 

Contents:

• 1 x Fernox Protector F1 17.6oz (500ml)
• 1 x Fernox Cleaner F3 17.6oz (500ml)
• 4 x Fernox pH Test Strips
• 1 x Fernox Protector Test Kit Instruction Leaflet

Good practice dictates that hydronic central heating systems should be thoroughly cleaned and flushed before installing a new boiler, after which a chemical inhibitor should be added to ensure the system is protected from corrosion, scale and sludge build-up. These procedures should also be employed when major work is carried out on a system. A clean, protected system helps ensure that the heat generated by the boiler is transmitted efficiently into the house over the long term

• Maintain the design specification and energy efficiency
• Restore energy efficiency
• Inhibit the formation of scale and sludge
• Minimize corrosion of system metals
• Product code: 59480

 

Contents:

• 1 x Fernox Protector F1 17.6oz (500ml)
• 1 x Fernox Cleaner F3 17.6oz (500ml)
• 4 x Fernox pH Test Strips
• 1 x Fernox Protector Test Kit Instruction Leaflet