Search results for 'Ta'
-
Watts Radiant 1/2" Swedged Manifolds with Mini Ball Valves
Watts Radiant 1/2" Swedged Manifolds with Mini Ball ValvesSwedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).$51.36 -
Watts Radiant RadiantPEX-AL 3/8" Compression Coupling
Watts Radiant RadiantPEX-AL 3/8" Compression CouplingRadiantPEX-AL Compression Couplings (Equal)$5.62 -
Webstone Sweat Isolator Flange with Drain
Webstone Sweat Isolator Flange with Drain 3/4", 1", 1-1/4", 1-1/2" and 2"Webstone Isolation Flanges with Drain are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The unitary construction of the brass body and flange provide strength and versatility for any application where a pipe and flange meet. This valve is the only choice to use in a closed system where a large port drain and fill valve is required.Additional wing style "T" handle included with mounting nuts and bolts.$26.58 -
Red-White 3/4" NPT Brass In-line Spring Check Valve
Red-White 23205 3/4" NPT Brass In-line Spring Check ValveProduct Features
- 200# WOG
- Forge Brass Body
- Threaded Ends
- Spring loaded
- Horizontal or Vertical Installation
- NBR Soft Seat
$11.42 -
-
Caleffi Series 573 Backflow Preventers 1/2" Sweat Inlet/Outlet
Caleffi Series 573 Backflow Preventers 1/2" Sweat Inlet/OutletDual check continuous pressure backflow preventer with atmospheric vent. Brass body. Max. working pressure: 175 psi. Working temperature range: 32—210°F. ASSE 1012 listed and CSA B64.3 certified.$39.29 -
Buderus Radiator Fitting for 1/2" KITEC
Radiator Fitting for 1/2" KITECReplacement Radiator Fitting for 1/2" KITEC$17.88 -
Caleffi Series 676 Two-way Thermoelectric Zone Valve Including Actuator
Caleffi Series 676 Two-way Thermoelectric Zone ValveZone valves are used to control hot and chilled water in heating and air conditioning systems. Coupled with an electro-thermal control actuator and managed by a room thermostat, they allow automatic on/off control of the hydronic circuit on which they are installed. Their special feature is their compact size and they can therefore be installed almost anywhere including baseboard or directly in fan-coil units.$57.30 -
Tjernlund Gas Pressure Switch
Gas Pressure SwitchThe gas pressure switch is mounted on the casing of the water heater adjacent to the heater's thermostat/gas control valve. It should be mounted close enough so that the supplied 1/4" tubing will reach from the gas pressure switch fitting to the thermostat/gas valve pressure tap port. The two provided screws are self-tapping and drilling. The screws do not require the use of a drill and their 1/2" length assures that the inner tank will not be penetrated$86.00 -
Caleffi Series Z2 Z-One Valve Body, 2 Way 1" Sweat 7.5 Cv, 20 psi
Caleffi Z-One Valve Body, 2 Way 1" Sweat 7.5 Cv, 20 psiTwo-way on/off two position valve. Straight through flow pattern. Brass body.* Stainless steel stem. EPDM rubber seals and paddle. Max. working pressure: 300 psi. Max temperature: 240°F. *Agency Approval for low-lead brass body: Lead plumbing law compliance: (0.25 max. weighted average lead content). Lead plumbing law certified by IAPMO R&T$46.66