Automatic air vent with service check valve.
Brass body.
Max. working pressure: 150 psi.
Max. discharge pressure: 90 psi.
Max. working temperature: 240°F.
1" NPT Inlet Ball valves and 3/4" outlets. This pre-assembled distribution assembly with Return distribution manifold including Built-In Shut-Off Valves suitable for Thermo-Electric Actuators, and Supply distirbution manifold including Manually-Adjustable Balancing Valves. MAX working pressure: 150 psi. MAX temperature 210 F.
Distribution manifolds for radiant panel systems are used to optimally distribute the heating fluid in floor
heating system circuits and ultimately improve the control of heat emission from the panels. The manifolds
ensure that the flow of each circuit is regulated precisely and also control the shut-off, venting and automatic
removal of air from the system.
Dirt Separator.
Brass Body.
1/2" NPT Top Thread With Plug For Optional Air Vent, Code 502243A
Max. Working Pressure: 150 PSI.
Working Temperature Range: 32-250F.
Particle Separation Capacity: To 0.2 mil
In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.
Balancing Valve with Flow Meter, offers direct reading of flow rate, no sight gauge clouding or scaling. Has brass valve body and flow meter, rotatable valve for flow rate adjustement, and graduated scale flow meter with magnetic movement flow rate indicator. MAX working pressure: 150 psi. Temperature range: 14-230 F. Max percentage of glycol: 50%.
The 132 series balancing valve accurately sets the flow rate of heating and cooling transfer fluid
supplied to fan coils and terminal units or where flow balancing is required in solar thermal
systems. Proper hydronic system balancing ensures that the system operates according to design
specifications, providing satisfactory thermal comfort with low energy consumption. The flow
meter is housed in a bypass circuit on the valve body and can be shut off during normal operation.
The flow meter permits fast and easy circuit balancing without added differential pressure gauges
and reference charts. The balancing valve is furnished with a preformed insulation shell to
optimize thermal performance or both hot and cold water systems.
