Adjustable thermostatic and pressure
balanced mixing valve for point of
distribution in domestic water systems
and radiant hydronic heating systems.
Low-lead brass body.
Internal anti-scale materials.
Locking set point knob.
Max. working pressure: 200 psi.
Max. inlet temperature: 200ºF.
Adjustable range: 85—150ºF.
Gauge scale: 30—210ºF.
Gauge accuracy: ± 6ºF.
Gauge dial: 2" diameter.
ASSE 1017 Listed.
Lead Plumbing Law Compliance:
(0.25% Max. weighted average lead
content).
Lead Plumbing Law Certified by
IAPMO R&T.
Caleffi Series 676 Two-way Thermoelectric Zone Valve
Zone valves are used to control hot and chilled water in heating and air conditioning
systems. Coupled with an electro-thermal control actuator and
managed by a room thermostat, they allow automatic on/off control of the
hydronic circuit on which they are installed.
Their special feature is their compact size and they can therefore be installed
almost anywhere including baseboard or directly in fan-coil units.
Air separator.
Brass body.
Stainless steel mesh internal element.
½" NPT bottom thread.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Air separators are used to continuously remove the air contained in the
hydronic circuits of heating and cooling systems. The air discharge
capacity of these devices is very high. They are capable of removing
automatically all the air present in the system down to micro-bubble level.
The circulation of fully de-aerated water enables the equipment to operate
under optimum conditions, free from any noise, corrosion, localized
overheating or mechanical damage. Micro-bubbles, fuse together,
increase in volume until they become large enough to rise to the top where
they are automatically released.
Pro-Tek® 922 is a concentrated corrosion inhibitor treatment specially formulated for hot water closed loop heating systems.
Pro-Tek® 922 is a concentrated corrosion inhibitor treatment specially formulated for hot water closed loop heating systems. Many water sources used in hydronic heating systems can be very corrosive to metals when heated. Pro-Tek 922 will help to reduce corrosion on aluminum, brass, copper, iron, and stainless steel. Pro-Tek 922 has also been tested and is compatible with standard PEX and Onix tubing typically used in hydronic installations.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
The zero leakage high temperature zone valve body Z2 series is 2-way straight
through and the valve body Z3 series is 3-way diverting. The Z1 series
actuator is easily attached by a push button lock and without tools.
The high temperature and high close-off performance characteristics of these
zone valves, combined with the compact size, makes them suitable to fit inside
baseboard or directly in fan coil units.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
Grundfos Brute Three Speed Bronze Recirculator Pump
The Grundfos UPS26-99BFC (52722518) model incorporates a three speed motor for increased versatility, a built-in check valve and a bronze housing for ehnaced corrosion resistance. The wet rotor design allows it to be virtually silent while operating, while built-in motor protection assures long life of the circulator. Performance parameters (flow rates and pressure drop) of the Grundfos UPS26-99BFC model make it well suited for a wide range of applications, from radiant and hydronic heating, to domestic hot water recirculatio, solar, chilled water cooling and many others.
Johnson A419GBF-1C 24VAC Single Stage Temperature Control
The A419 series controls are single-stage, electronic temperature controls with a Single-Pole, Double-Throw (SPDT) output relay. They feature a lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD) for viewing the temperature and status of other functions. A Light-Emitting Diode (LED) indicates the controls? output relay On/Off status. The A419 controls are available in 24 VAC or 120/240 VAC powered models. The A419 controls have heating and cooling modes, adjustable setpoint and differential, an adjustable anti-short cycle delay, and a temperature offset function. The setpoint range is -30 to 212°F (-34 to 100°C). The controls feature remote sensing capability and interchangeable sensors. The A419 controls are available in either NEMA 1, high-impact plastic enclosure suitable for surface or DIN rail mounting or NEMA 4X watertight, corrosion-resistant surface-mount enclosures.
Johnson Controls Single Stage Digital Temperature Control (120/240v SPDT)
The A419 series controls are single-stage, electronic temperature controls with a Single-Pole, Double-Throw (SPDT) output relay. They feature a lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD) for viewing the temperature and status of other functions. A Light-Emitting Diode (LED) indicates the controls? output relay On/Off status. The A419 controls are available in 24 VAC or 120/240 VAC powered models. The A419 controls have heating and cooling modes, adjustable setpoint and differential, an adjustable anti-short cycle delay, and a temperature offset function. The setpoint range is -30 to 212°F (-34 to 100°C). The controls feature remote sensing capability and interchangeable sensors. The A419 controls are available in either NEMA 1, high-impact plastic enclosure suitable for surface or DIN rail mounting or NEMA 4X watertight, corrosion-resistant surface-mount enclosures.
