Search results for 'PALOMA WATER HEATER PH-5-3F'

Wet rotor circulation pump, with 3/4" solder connection. Bronze body for domestic hot water applications

Heating appliances are designed to operate with a consistent draft. Chimney configurations, mechanical draft fans and weather can cause draft fluctuations. These fluctuations result in inefficient combustion and more frequent service calls. Draft controls regulate the airflow through a chimney or vent. By diluting the chimney/vent draft with varying amounts of room air they maintain the draft at a heater's flue outlet within a consistent, safe and efficient range. This single acting control is made of galvanized steel for low maintenance and corrosion resistance. It has integral anchor points and self- aligning, self-centering rocker bearings for long lasting service. A cushioned stop minimizes rattle and noise. Adjustment is easily accomplished by moving counter weight on outside tab.

Adjustable, anti-scald thermostatic mixing valve. The thermostatic mixer is used in systems producing domestic hot water or in radiant panel heating systems. Its function is to maintain the temperature of the mixed water supplied to the user constant at the set value when there are variations in the supply conditions of the incoming hot and cold water. The valve has been specifically certified to ASSE 1017.

Grundfos UP10-16B5/TLC model (Grundfos SKU# 96433895) is a Bronze Comfort Series Pump with Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Grundfos Comfort series pumps, such as the UP10-16B5/TLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.

Designed for residential, commercial or industrial use with water, oil or gas. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing nut. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or over heat valves when soldering.

Z-one valves are used to automatically shut-off the flow or redirect hot and chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an end mounted push button for quick installation to valve body. The actuator is equipped with or without auxiliary switch and configured Normally closed or Normally Opened with wire or terminal connections.

Wet rotor circulation pump, with 1/2" solder connection. Bronze body for domestic hot water applications

 

CENTRAL HEATING CLEANER F5 EXPRESS

 

• Quick ,convenient and simple to use – doses in 30 seconds

 

• Added via a radiator adapter or filling loop supplied

 

• 100% recyclable can

 

• Compatible with all metals and materials including aluminium

 

• Removes sludge and scale and restores heating efficiency

 

• Removes flux residues and other debris

 

• Neutral, non-hazardous and environmentally formulation

Cleaner F5 Express has been designed for pre-commission cleaning of new installations in accordance with BS7593:1992, removing flux residues and other installation debris, to help extend the life of a system.

Cleaner F5 Express can be used in conjunction with Fernox Powerflow MKII machine and all known makes of powerflushing machines to remove all debris, sludge and scale from existing systems. In this way, it will restore heating efficiency and eliminate or reduce boiler noise in heavily contaminated systems.

If the system is heavily scaled the use of Fernox DS40 System Cleaner is recommended.

Cleaner F5 Express is a neutral, non-hazardous product that is well inhibited and compatible with all metals and materials commonly used in heating systems.

For continued long term protection the system should be thoroughly cleaned and flushed in accordance with legislation BS7593:1992 and Benchmark using Fernox Cleaner F5 Express, before treating with a Fernox Protector F1. We recommend Protector levels are checked regularly (annually).

Physical Properties

Colour: Amber

Odour: Faint

Form: Liquid

pH (conc): 7

pH (1% soln) 7.5 - 7.8

SG: 1.201 g/cm

3

(20°C / 68°F)

 Cleaner F5 Express will protect an average sized system (100 litres or up to ten single radiators) and maybe added via a radiator or filling loop. Fernox Cleaner F5 Express can be dispensed directly into a radiator air vent or system filling loop using the appropriate special adapter supplied with the product. Additional/repeat applications of Cleaner F5 Express may be necessary, for larger systems or if systems are heavily sludged.

When using Cleaner F5 Express with a powerflushing unit, cleaning should be completed within an hour. Use dynamic flushing with plain water until the water is clear, testing with the TDS meter as above to ensure thorough flushing.

Refill the system adding a suitable Fernox Protector for long term protection against corrosion and limescale.

In single feed indirect cylinders, e.g. "Primatic" or similar, potable water chemicals must be used.

First drain and refill the entire system with plain water. For optimum results the entire system, including drop feed radiators, where fitted, should be completely drainable. Preferably full bore gate valves with hose connectors should be provided temporarily for this purpose. Motorised and thermostatically controlled valves must be set so that no part of the system is closed off during cleaning or rinsing. Discharges must be made to the foul drain and not the surface water drain.

For open vented systems add Fernox Cleaner F5 Express via the header tank. For sealed systems add via a radiator using a Fernox Injector.

When cleaning existing systems, sludge and debris should be dispersed for at least one hour at normal operating temperatures. However, to remove hardened iron oxides and limescale, the cleaning time can be extended to up to one week under the normal heating cycle. If a radiator still has a cold spot after one hour, increase the flow through the radiator by closing the valves on the other radiators. An additional or repeat dose of Cleaner F5 Express may be necessary in some cases.

Drain and flush the system thoroughly to remove the cleaning chemical and debris. At least three complete changes of water are likely to be required. This is a crucial part of the cleaning process and must be carried out correctly. Use a rinse test meter such as the Fernox TDS meter to ensure that the Total Dissolved Solids have been satisfactorily removed. The system can be regarded as being thoroughly flushed when the system water value is within 10% of the mains water value. Differences over 10% mean that significant cleaner residues have been left in the system and further flushing is required. If not removed, cleaner residues will promote corrosion and negate the cleaning process.

Fernox Cleaner F5 Express is supplied in 280ml aerosol cans with a universal applicator set.

Fernox Cleaner F5 Express is classified as non-hazardous. But as with all chemicals: Keep out of reach of children. In case of contact with skin or eyes, rinse immediately with plenty of water. Wear suitable gloves

The A419 series controls are single-stage, electronic temperature controls with a Single-Pole, Double-Throw (SPDT) output relay. They feature a lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD) for viewing the temperature and status of other functions. A Light-Emitting Diode (LED) indicates the controls? output relay On/Off status. The A419 controls are available in 24 VAC or 120/240 VAC powered models. The A419 controls have heating and cooling modes, adjustable setpoint and differential, an adjustable anti-short cycle delay, and a temperature offset function. The setpoint range is -30 to 212°F (-34 to 100°C). The controls feature remote sensing capability and interchangeable sensors. The A419 controls are available in either NEMA 1, high-impact plastic enclosure suitable for surface or DIN rail mounting or NEMA 4X watertight, corrosion-resistant surface-mount enclosures.