Search results for 'retail stores that sell tempra 24'

CENTRAL HEATING CLEANER F5 EXPRESS

• Quick ,convenient and simple to use – doses in 30 seconds

• Added via a radiator adapter or filling loop supplied

• 100% recyclable can

• Compatible with all metals and materials including aluminium

• Removes sludge and scale and restores heating efficiency

• Removes flux residues and other debris

• Neutral, non-hazardous and environmentally formulation

Cleaner F5 Express has been designed for pre-commission cleaning of new installations in accordance with BS7593:1992, removing flux residues and other installation debris, to help extend the life of a system.

Cleaner F5 Express can be used in conjunction with Fernox Powerflow MKII machine and all known makes of powerflushing machines to remove all debris, sludge and scale from existing systems. In this way, it will restore heating efficiency and eliminate or reduce boiler noise in heavily contaminated systems.

If the system is heavily scaled the use of Fernox DS40 System Cleaner is recommended.

Cleaner F5 Express is a neutral, non-hazardous product that is well inhibited and compatible with all metals and materials commonly used in heating systems.

For continued long term protection the system should be thoroughly cleaned and flushed in accordance with legislation BS7593:1992 and Benchmark using Fernox Cleaner F5 Express, before treating with a Fernox Protector F1. We recommend Protector levels are checked regularly (annually).

Physical Properties

Colour: Amber

Odour: Faint

Form: Liquid

pH (conc): 7

pH (1% soln) 7.5 - 7.8

SG: 1.201 g/cm

3

(20°C / 68°F)

 Cleaner F5 Express will protect an average sized system (100 litres or up to ten single radiators) and maybe added via a radiator or filling loop. Fernox Cleaner F5 Express can be dispensed directly into a radiator air vent or system filling loop using the appropriate special adapter supplied with the product. Additional/repeat applications of Cleaner F5 Express may be necessary, for larger systems or if systems are heavily sludged.

When using Cleaner F5 Express with a powerflushing unit, cleaning should be completed within an hour. Use dynamic flushing with plain water until the water is clear, testing with the TDS meter as above to ensure thorough flushing.

Refill the system adding a suitable Fernox Protector for long term protection against corrosion and limescale.

In single feed indirect cylinders, e.g. "Primatic" or similar, potable water chemicals must be used.

First drain and refill the entire system with plain water. For optimum results the entire system, including drop feed radiators, where fitted, should be completely drainable. Preferably full bore gate valves with hose connectors should be provided temporarily for this purpose. Motorised and thermostatically controlled valves must be set so that no part of the system is closed off during cleaning or rinsing. Discharges must be made to the foul drain and not the surface water drain.

For open vented systems add Fernox Cleaner F5 Express via the header tank. For sealed systems add via a radiator using a Fernox Injector.

When cleaning existing systems, sludge and debris should be dispersed for at least one hour at normal operating temperatures. However, to remove hardened iron oxides and limescale, the cleaning time can be extended to up to one week under the normal heating cycle. If a radiator still has a cold spot after one hour, increase the flow through the radiator by closing the valves on the other radiators. An additional or repeat dose of Cleaner F5 Express may be necessary in some cases.

Drain and flush the system thoroughly to remove the cleaning chemical and debris. At least three complete changes of water are likely to be required. This is a crucial part of the cleaning process and must be carried out correctly. Use a rinse test meter such as the Fernox TDS meter to ensure that the Total Dissolved Solids have been satisfactorily removed. The system can be regarded as being thoroughly flushed when the system water value is within 10% of the mains water value. Differences over 10% mean that significant cleaner residues have been left in the system and further flushing is required. If not removed, cleaner residues will promote corrosion and negate the cleaning process.

Fernox Cleaner F5 Express is supplied in 280ml aerosol cans with a universal applicator set.

Fernox Cleaner F5 Express is classified as non-hazardous. But as with all chemicals: Keep out of reach of children. In case of contact with skin or eyes, rinse immediately with plenty of water. Wear suitable gloves

CENTRAL HEATING CLEANER F3

• Neutral universal cleaner for pre-commissioning new systems in accordance with BS7593:2006

• Removes sludge, limescale and other debris to restore heating efficiency of existing systems

• When used in conjunction with Protector F1 gas savings of up to 15% can be achieved every time you heat your room

• Carbon Footprint certified by the Carbon Trust

• Compatible with all metals and materials commonly used in heating systems

• Easy to use, system can be left running normally during cleaning

• Suitable for use with all known powerflushing machines

• Neutral, non-hazardous formula (COSHH rated zero)

Fernox Cleaner F3 is designed to remove all debris, sludge and scale from existing systems of all ages. In this way, it will restore heating efficiency and eliminate or reduce boiler noise. It has also been designed for pre-commission cleansing new installations inaccordance with BS7593:2006, removing flux residues and other debris, thereby helping extend the life of a system. For older sludged systems, Cleaner F3 is particularly effective when used in conjunction with a powerflushing unit. If the system is heavily scaled the use of Fernox DS40 System Cleaner is recommended. Cleaner F3 is a neutral, non-hazardous product that is well inhibited and compatible with all metals and materials commonly used in heating systems. For continued long term protection the system should be thoroughly cleansed and flushed in accordance with BS7593:2006 and Benchmark using Fernox Cleaner F3, before treating with Fernox Protector F1. We recommend Protector levels are checked regularly (annually).

‘If you clean a central heating system using Fernox F3 Cleaner, and protect with Fernox F1 Protector, you can restore and maintain system efficiency resulting in a gas saving of up to 15% every time you heat your room. This saving is equivalent to 90 Kg CO2e per typical home per year.’ This is the equivalent to saving 2400 hours of operating a standard 60W light bulb, or leaving the same light bulb on continuously for 100 days!

Easy.  Smart.  Green.

The Smart Si is Wi-Fi enabled, so you can make adjustments to your thermostat on the go from your tablet, computer, iPhone or Smart Phone. An easy to read high-resolution color display, sleek buttons, and an intuitive user interface makes it easy to quickly set a personalized program, adjust your settings and create new vacation events whenever you need to.

The Smart Si has a built-in live weather function and uses advanced algorithms so you can be sure your thermostat is always saving the most energy possible. (Now that’s smart!) Automatic alerts and reminders notify you when your HVAC equipment is due for service, if there is an equipment malfunction or when it’s time to change your filter, so you don’t have to worry about it.

Did you know that setting an energy-saving program through your thermostat is one of the easiest ways to reduce your energy consumption and save money? A recent study estimated that the average ecobee homeowner saved 26% on their heating and cooling energy costs.*

* Versus the benchmark of leaving their thermostat on hold at 72 degrees Fahrenheit or 22 degrees Celcius.

Buderus, the world's largest producer of cast iron boilers, manufactures high output hydronic steel panel radiators which are stocked in the U.S. Panel radiators produce an incredibly comfortable heat by providing both convected and radiant heat. Radiant heat warms objects rather than air, creating a greater sense of warmth faster and at lower room temperatures. Buderus radiators are designed to operate with individual thermostats.

The design and styling of Buderus radiators eliminates the noise associated with other heating systems and utilize less space than baseboard. Unique Buderus styling also minimizes area where dust and dirt can collect. All these features combine to offer you a cleaner, quieter, and more comfortable source of heat. All Buderus panel radiators are supplied in powder-enameled white. If you prefer, you can paint them any color you wish. Each panel includes side panels, grill covers and flowsetter valve.

**Note: BTU Output @ 180° F .

Because of the special nature of this product it does not qualify for free shipping and our website cannot quote the best freight. Please place your order on our website and we will contact you with freight options. Even better, call us to check availability and freight!

The revolutionary Fernox Total Filter TF1 is a unique hydrocyclonic and magnetic in-line filter that removes and contains magnetic and non-magnetic contaminants from central heating systems. Easy to install with no additional parts needed, the Total Filter TF1 has also been designed as a dosing point for the Fernox 'F' range of chemical water treatment products to ensure the system's long lasting performance.

The new Fernox TF1 in-line filter can be connected directly onto 22mm and 28mm pipe work using the valve fittings provided and can be positioned flush to a wall in existing pipe work. Once installed, it can be cleaned in seconds and easily and without having to disassemble or remove the unit.

"The Fernox TF1 has been specifically developed to provide installers with an easy to fit filter that helps maintain the performance and longevity of a central heating system," explained Francine Wickham, European Marketing Director. "The hydrocyclonic and magnetic filters remove and contain contaminants so that the system can work effectively. The Fernox TF1 filter then provides an easy way for installers to dose the system for long term protection."

All Fernox TF1 filters are manufactured in the UK and each one tested so installers can be assured of performance and reliability every time.

Hydrocyclonic and magnetic in-line filter

• Unique action, removes all contaminants magnetic and non-magnetic
• Fits vertical and horizontal pipe work
• Dosing point for Fernox ‘F’ range products
• Cleaned in seconds without removal or disassembly
• Will not block or restrict flow
• All valves and fittings included

Good practice dictates that hydronic central heating systems should be thoroughly cleaned and flushed before installing a new boiler, after which a chemical inhibitor should be added to ensure the system is protected from corrosion, scale and sludge build-up. These procedures should also be employed when major work is carried out on a system. A clean, protected system helps ensure that the heat generated by the boiler is transmitted efficiently into the house over the long term

• Maintain the design specification and energy efficiency
• Restore energy efficiency
• Inhibit the formation of scale and sludge
• Minimize corrosion of system metals
• Product code: 59480

Contents:

• 1 x Fernox Protector F1 17.6oz (500ml)
• 1 x Fernox Cleaner F3 17.6oz (500ml)
• 4 x Fernox pH Test Strips
• 1 x Fernox Protector Test Kit Instruction Leaflet

Good practice dictates that hydronic central heating systems should be thoroughly cleaned and flushed before installing a new boiler, after which a chemical inhibitor should be added to ensure the system is protected from corrosion, scale and sludge build-up. These procedures should also be employed when major work is carried out on a system. A clean, protected system helps ensure that the heat generated by the boiler is transmitted efficiently into the house over the long term

• Maintain the design specification and energy efficiency
• Restore energy efficiency
• Inhibit the formation of scale and sludge
• Minimize corrosion of system metals
• Product code: 59480

Contents:

• 1 x Fernox Protector F1 17.6oz (500ml)
• 1 x Fernox Cleaner F3 17.6oz (500ml)
• 4 x Fernox pH Test Strips
• 1 x Fernox Protector Test Kit Instruction Leaflet

These differential pressure controls are for use as operating controls and/or indicating system functions through display lights or panels. They measure the difference in pressure exerted upon its two sensing elements. The controls are available for applications sensing air, oil or liquid. Typical applications are proof of flow across a chiller or water cooled condenser, proof of flow in a heating or cooling coil and lube oil pressure sensing on refrigeration compressors. On a proof of flow application the control measures pressure drop across two different points in either a closed water circulating system or a city water to supply system.

On a proof of flow application in a water chiller system the control activates a light or signal to indicate a loss of water.The control may also be applied as a lube oil pressure sensing control on refrigeration compressors. They may be used in combination with P28 and/or P45 oil pressure cutout controls on two compressor, single motor units to reduce the oil system cost. Special low pressure models are available for variable speed and screw compressor oil pressure applications.

Single and double pole models are available with contacts that open on a pressure differential increase or close on a pressure differential increase. Also available are models with single-pole, double-throw enclosed contacts or with main and separate reverse-acting auxiliary contacts. Controls with lockout feature require manual reset to reclose circuit after lockout. The ?trip-free? reset will not permit restart until reset button is pushed and released. The operation point of the control is readily adjusted by rotating the adjusting disk. The control set points are easily read on a calibrated scale.