Search results for 'heat exchanger inlet'

The AutoFill™ automatic filling valve is a pressure reducing valve with a compensating seat, an inlet filter, a shut-off valve and a check valve. It is installed on the water inlet piping in sealed heating systems, and its main function is to maintain the pressure of the system to a preset value, automatically filling up with water as required. This valve has been designed as pre-adjustable, which means it can be adjusted at the required pressure value before charging the system. After installation, during the filling or topping-off phase, the water feed will stop automatically when the set pressure is reached. There are no levers to flip or valve to close. Preassembled with the backflow preventer, it features an atmospheric vent which is designed to protect drinking water systems from return flow, caused by back-siphoning or backpressure, of contaminated fluids. The 573 series has been specifically certified to standards CSA B64.3 and ASSE 1012.

Buderus, the world's largest producer of cast iron boilers, manufactures high output hydronic steel panel radiators which are stocked in the U.S. Panel radiators produce an incredibly comfortable heat by providing both convected and radiant heat. Radiant heat warms objects rather than air, creating a greater sense of warmth faster and at lower room temperatures. Buderus radiators are designed to operate with individual thermostats.

The design and styling of Buderus radiators eliminates the noise associated with other heating systems and utilize less space than baseboard. Unique Buderus styling also minimizes area where dust and dirt can collect. All these features combine to offer you a cleaner, quieter, and more comfortable source of heat. All Buderus panel radiators are supplied in powder-enameled white. If you prefer, you can paint them any color you wish. Each panel includes side panels, grill covers and flowsetter valve.

**Note: BTU Output @ 180° F .

Because of the special nature of this product it does not qualify for free shipping and our website cannot quote the best freight. Please place your order on our website and we will contact you with freight options. Even better, call us to check availability and freight!

The thermostatic mixer is used in systems producing domestic hot water or in radiant panel heating systems. Its function is to maintain the temperature of the mixed water supplied to the user constant at the set value when there are variations in the supply conditions of the incoming hot and cold water. The valve has been specifically certified to ASSE 1017.

Caleffi Series 519 Differential Pressure Bypass Valve with 1" NPT Female Inlet and 1" Sweat Outlet.

In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.

Buderus, the world's largest producer of cast iron boilers, manufactures high output hydronic steel panel radiators which are stocked in the U.S. Panel radiators produce an incredibly comfortable heat by providing both convected and radiant heat. Radiant heat warms objects rather than air, creating a greater sense of warmth faster and at lower room temperatures. Buderus radiators are designed to operate with individual thermostats.

The design and styling of Buderus radiators eliminates the noise associated with other heating systems and utilize less space than baseboard. Unique Buderus styling also minimizes area where dust and dirt can collect. All these features combine to offer you a cleaner, quieter, and more comfortable source of heat. All Buderus panel radiators are supplied in powder-enameled white. If you prefer, you can paint them any color you wish. Each panel includes side panels, grill covers and flowsetter valve.

**Note: BTU Output @ 180° F .

Because of the special nature of this product it does not qualify for free shipping and our website cannot quote the best freight. Please place your order on our website and we will contact you with freight options. Even better, call us to check availability and freight!

In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.

CENTRAL HEATING CLEANER F3

• Neutral universal cleaner for pre-commissioning new systems in accordance with BS7593:2006

• Removes sludge, limescale and other debris to restore heating efficiency of existing systems

• When used in conjunction with Protector F1 gas savings of up to 15% can be achieved every time you heat your room

• Carbon Footprint certified by the Carbon Trust

• Compatible with all metals and materials commonly used in heating systems

• Easy to use, system can be left running normally during cleaning

• Suitable for use with all known powerflushing machines

• Neutral, non-hazardous formula (COSHH rated zero)

Fernox Cleaner F3 is designed to remove all debris, sludge and scale from existing systems of all ages. In this way, it will restore heating efficiency and eliminate or reduce boiler noise. It has also been designed for pre-commission cleansing new installations inaccordance with BS7593:2006, removing flux residues and other debris, thereby helping extend the life of a system. For older sludged systems, Cleaner F3 is particularly effective when used in conjunction with a powerflushing unit. If the system is heavily scaled the use of Fernox DS40 System Cleaner is recommended. Cleaner F3 is a neutral, non-hazardous product that is well inhibited and compatible with all metals and materials commonly used in heating systems. For continued long term protection the system should be thoroughly cleansed and flushed in accordance with BS7593:2006 and Benchmark using Fernox Cleaner F3, before treating with Fernox Protector F1. We recommend Protector levels are checked regularly (annually).

‘If you clean a central heating system using Fernox F3 Cleaner, and protect with Fernox F1 Protector, you can restore and maintain system efficiency resulting in a gas saving of up to 15% every time you heat your room. This saving is equivalent to 90 Kg CO2e per typical home per year.’ This is the equivalent to saving 2400 hours of operating a standard 60W light bulb, or leaving the same light bulb on continuously for 100 days!

Pre-adjustable automatic filling valve with backflow preventer. Brass body. Max. inlet pressure: 175 psi. Max. working temperature: 150°F. Setting pressure range: 3—60 psi. Preset outlet pressure: 15 psi.