Search results for 'ph 25'

Heats a 2 ½ car garage. Turns unheated space into a workshop, exercise room or laundry room.

Two-way on/off two position valve. Straight through flow pattern. Brass body.* Stainless steel stem. EPDM rubber seals and paddle. Max. working pressure: 300 psi. Max temperature: 240°F. *Agency Approval for low-lead brass body: Lead plumbing law compliance: (0.25 max. weighted average lead content). Lead plumbing law certified by IAPMO R&T

Radiant PEX-AL is a composite pipe engineered for radiant floor heating. It's proven, long lasting and maintenance free. Installers like it because it's lightweight, durable and can be shaped to fit any jobsite. The aluminum layer protects boiler systems against corrosion and it has superior temperature and pressure ratings. RadiantPEX-AL pipe and fittings are manufactured to American Standard Testing Methods for requirements and test methods for materials, workmanship, dimensions, environmental stress, cracking, sustained hydrostatic pressure strength, thermo-cycling resistance and bend strength, among other tests. RadiantPEX-AL meets or exceeds these specifications.

Buderus, the world's largest producer of cast iron boilers, manufactures high output hydronic steel panel radiators which are stocked in the U.S. Panel radiators produce an incredibly comfortable heat by providing both convected and radiant heat. Radiant heat warms objects rather than air, creating a greater sense of warmth faster and at lower room temperatures. Buderus radiators are designed to operate with individual thermostats.

The design and styling of Buderus radiators eliminates the noise associated with other heating systems and utilize less space than baseboard. Unique Buderus styling also minimizes area where dust and dirt can collect. All these features combine to offer you a cleaner, quieter, and more comfortable source of heat. All Buderus panel radiators are supplied in powder-enameled white. If you prefer, you can paint them any color you wish. Each panel includes side panels, grill covers and flowsetter valve.

**Note: BTU Output @ 180° F .

Because of the special nature of this product it does not qualify for free shipping and our website cannot quote the best freight. Please place your order on our website and we will contact you with freight options. Even better, call us to check availability and freight!

The AutoFill™ automatic filling valve is a pressure reducing valve with a compensating seat, an inlet filter, a shut-off valve and a check valve. It is installed on the water inlet piping in sealed heating systems, and its main function is to maintain the pressure of the system to a preset value, automatically filling up with water as required. This valve has been designed as pre-adjustable, which means it can be adjusted at the required pressure value before charging the system. After installation, during the filling or topping-off phase, the water feed will stop automatically when the set pressure is reached. There are no levers to flip or valve to close. Preassembled with the backflow preventer, it features an atmospheric vent which is designed to protect drinking water systems from return flow, caused by back-siphoning or backpressure, of contaminated fluids. The 573 series has been specifically certified to standards CSA B64.3 and ASSE 1012.

The Grundfos UPS26-99BFC (52722518) model incorporates a three speed motor for increased versatility, a built-in check valve and a bronze housing for ehnaced corrosion resistance. The wet rotor design allows it to be virtually silent while operating, while built-in motor protection assures long life of the circulator. Performance parameters (flow rates and pressure drop) of the Grundfos UPS26-99BFC model make it well suited for a wide range of applications, from radiant and hydronic heating, to domestic hot water recirculatio, solar, chilled water cooling and many others.

Webstone Isolation Flanges are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The forged brass body and flange provide strength and versatility for any application where a pipe and flange meet. This approved Webstone valve features a solid hard chrome plated brass ball with reinforced Teflon seats and a blowout proof stem sealed with Teflon and an adjustable packing gland. Additional wing style "T" handle included with mounting nuts and bolts.

Universal Flow Switch for heating and air conditioning systems. Suitable for 1" to 8" pipe size. Working pressure: 150 psi. Working Temperature: 250 F. Minimum Flow: 5.7 GPM. Rating of switch contacts : 5A. CE, cUL, NEMA Type 5, IP 54

Wilo Top S 1.5 x 30 Two Speed Pump 115VThis pump is made from combination of stainless steel, polypropylene and metal impregnated carbon. It's main feature is the 2 speed motor. This is a wet rotor - "seal less" design type pump. Great for residential and light commercial applicationsPermitted temperature range -20° C to +130° C, in short-term operation (2h) to +140° CPre-selectable speed stages for manual capacity adjustmentPump communication based on simple plug technology that can be reliably retrofittedCombination flanges PN6/ PN10 (DN 40 to DN 65)Cataphoretic coated pump housingThermal insulation shell as standardAutomatically VentedExtensible motor protection, signal and display functions1/4" suction and discharge gauge tappingsFor all hot-water heating systems, air-conditioning systems and closed cooling circuitsFlanges are not inculded.Specifications