The gas pressure switch is mounted on the casing of the water heater adjacent to the heater's thermostat/gas control valve. It
should be mounted close enough so that the supplied 1/4" tubing will reach from the gas pressure switch fitting to the thermostat/gas valve pressure tap port. The two provided screws are self-tapping and drilling. The screws do not require the use of a drill and their 1/2" length assures that the inner tank will not be penetrated
Wilo Classic Star 32F Cast Iron Single Speed Circulator, Flanged, Low Flow High Head
Wet rotor circulation pump, with flanged connection. (Flange perpendicular to shaft). Cast iron body for hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems.
Wilo Classic Star S 21FX 3 Speed Cast Iron Circulator, Rotated 90 Flange
Wet rotor circulation pump, with flanged connection. (Flange parallel to shaft). Pre-selectable speeds to adjust the capacity on "S" versions. Cast iron body for hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems.
Seal-less magnetic drive circulator with union or solder connection. Jet Connect fitting pack included. Compact, magnetic drive design. Six inch power cord included. Optional timer available. Domestic hot water re-circulation systems. NSF approved for drinking water applications.
Wilo Top S 1.5 by 30 Wet Rotor Hydronics Circulating Pump, 115-Volt
Wilo Top S 1.5 x 30 Two Speed Pump 115VThis pump is made from combination of stainless steel, polypropylene and metal impregnated carbon. It's main feature is the 2 speed motor. This is a wet rotor - "seal less" design type pump. Great for residential and light commercial applicationsPermitted temperature range -20° C to +130° C, in short-term operation (2h) to +140° CPre-selectable speed stages for manual capacity adjustmentPump communication based on simple plug technology that can be reliably retrofittedCombination flanges PN6/ PN10 (DN 40 to DN 65)Cataphoretic coated pump housingThermal insulation shell as standardAutomatically VentedExtensible motor protection, signal and display functions1/4" suction and discharge gauge tappingsFor all hot-water heating systems, air-conditioning systems and closed cooling circuitsFlanges are not inculded.Specifications
The Grundfos UP10-16B5/ATLC model is a Bronze Comfort Series Pump with Aquastat, Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Replaces old 96433896 model.
Grundfos Comfort series pumps, such as the UP10-16B5/ATLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.
Grundfos UP15-18B7/LC, Circulator Pump, 115V 9H Our Hot Water Recirculation systems save you time, money, and energy, by circulating hot water through your household plumbing without wasting it down the drain. Grundfos has a recirculation that is perfect for your new home! Grundfos 59896229 UP15-18B7/LC, Circulator Pump, 115V 9H Features: Built-in motor protection for long life Stainless steel construction for corrosion resistance Multiple accessories for a variety of applications Whisper-quiet operation for sound sensitive installations
Grundfos UP10-16B5/TLC Pump, 1/2" Sweat, 115V, Timer & Line Cord
Grundfos UP10-16B5/TLC model (Grundfos SKU# 96433895) is a Bronze Comfort Series Pump with Timer, Line Cord and has 1/2” sweat inlet/outlet connections.
Grundfos Comfort series pumps, such as the UP10-16B5/TLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.
Grundfos UP15-29SU model circulator incorporates a stainless steel body design and 1-1/4" union connection, smaking it suitable for a wide range of open and closed loop radiant heating, hydronic heating, hot water recirculation, solar & other applications.
