Search results for 'heat exchanger inlet'

Viessmann Vitoden Gas Boilers

 100-W Gas Fired Wall-Mounted Condensing Boiler with Modulating Stainless Steel Cylinder Burner and Inox-Radial Heat Exchanger Service.

 

Model		WB1B 26	WB1B 35
CSA input	MBH kW	37 - 91 8.5 - 23.4	37 - 118 8.5 - 29.3
CSA output *	MBH kW	34 - 83 7.6 - 21	34 - 108 7.6 - 26.4
Efficiency (A.F.U.E.)	%	95.2	95.2
Altitude levels	ft. m	0 - 10,000 0 - 3,048	0 - 10,000 0 - 3,048
Overall dimensions
Depth	inches mm	14⅛ 360	14⅛ 360
Width	inches mm	15¾ 400	15¾ 400
Height	inches mm	28½ 725	28½ 725
Shipping weight	lbs kg	95 43	95 43

* Output based on 140ºF / 60ºC, 120ºF / 49ºC system supply/return temperature.

Viessmann CombiPLUS Kit for Vitodens 100-WB1B

Optional On Demand Domestic Hot Water Kit for Reliable DHW Without a Tank.

 

Distribution manifolds for radiant panel systems are used to optimally distribute the heating fluid in floor heating system circuits and ultimately improve the control of heat emission from the panels. The manifolds ensure that the flow of each circuit is regulated precisely and also control the shut-off, venting and automatic removal of air from the system.

Viessmann Vitoden Gas Boilers

Gas-fired wall-mounted condensing boiler with modulating stainless steel cylinder burner and Inox-Radial heat exchanger surface.

Now Equipped with Lambda Pro: Industry's First Intelligent Combustion Management System.

Model		WB2B 19	WB2B 26	WB2B 35	WB2B 45	WB2B 60	WB2B 80	WB2B 105
CSA input	MBH kW	31-67 9-20	31-93 9-27	31-125 9-37	60-160 17-47	60-212 17-62	104-285 30-83	104-370 30-108
CSA output *	MBH kW	28-61 8-18	28-85 8-25	28-114 8-33	55-146 16-43	55-194 16-57	95-260 29-76	98-350 29-103
Efficiency (A.F.U.E.)	%	96.1	96.1	96.1	96.1	96.1	96.1	96.1

* Output based on 140ºF / 60ºC, 120ºF / 49ºC system supply/return temperature.

In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.

CENTRAL HEATING CLEANER F3

• Neutral universal cleaner for pre-commissioning new systems in accordance with BS7593:2006

• Removes sludge, limescale and other debris to restore heating efficiency of existing systems

• When used in conjunction with Protector F1 gas savings of up to 15% can be achieved every time you heat your room

• Carbon Footprint certified by the Carbon Trust

• Compatible with all metals and materials commonly used in heating systems

• Easy to use, system can be left running normally during cleaning

• Suitable for use with all known powerflushing machines

• Neutral, non-hazardous formula (COSHH rated zero)

Fernox Cleaner F3 is designed to remove all debris, sludge and scale from existing systems of all ages. In this way, it will restore heating efficiency and eliminate or reduce boiler noise. It has also been designed for pre-commission cleansing new installations inaccordance with BS7593:2006, removing flux residues and other debris, thereby helping extend the life of a system. For older sludged systems, Cleaner F3 is particularly effective when used in conjunction with a powerflushing unit. If the system is heavily scaled the use of Fernox DS40 System Cleaner is recommended. Cleaner F3 is a neutral, non-hazardous product that is well inhibited and compatible with all metals and materials commonly used in heating systems. For continued long term protection the system should be thoroughly cleansed and flushed in accordance with BS7593:2006 and Benchmark using Fernox Cleaner F3, before treating with Fernox Protector F1. We recommend Protector levels are checked regularly (annually).

‘If you clean a central heating system using Fernox F3 Cleaner, and protect with Fernox F1 Protector, you can restore and maintain system efficiency resulting in a gas saving of up to 15% every time you heat your room. This saving is equivalent to 90 Kg CO2e per typical home per year.’ This is the equivalent to saving 2400 hours of operating a standard 60W light bulb, or leaving the same light bulb on continuously for 100 days!

Pre-adjustable automatic filling valve with backflow preventer. Brass body. Max. inlet pressure: 175 psi. Max. working temperature: 150°F. Setting pressure range: 3—60 psi. Preset outlet pressure: 15 psi.

Good practice dictates that hydronic central heating systems should be thoroughly cleaned and flushed before installing a new boiler, after which a chemical inhibitor should be added to ensure the system is protected from corrosion, scale and sludge build-up. These procedures should also be employed when major work is carried out on a system. A clean, protected system helps ensure that the heat generated by the boiler is transmitted efficiently into the house over the long term

• Maintain the design specification and energy efficiency
• Restore energy efficiency
• Inhibit the formation of scale and sludge
• Minimize corrosion of system metals
• Product code: 59480

 

Contents:

• 1 x Fernox Protector F1 17.6oz (500ml)
• 1 x Fernox Cleaner F3 17.6oz (500ml)
• 4 x Fernox pH Test Strips
• 1 x Fernox Protector Test Kit Instruction Leaflet

Designed for residential, commercial or industrial use with water, oil or gas. This approved Webstone valve is actuated by a blowout proof stem and features an adjustable packing nut. Solder joint temperature ratings are per ASME B16.18 Annex A for 95-5 solder. Other solder materials have lower pressure/temperature limits. Do not silver braze or over heat valves when soldering.

Buderus, the world's largest producer of cast iron boilers, manufactures high output hydronic steel panel radiators which are stocked in the U.S. Panel radiators produce an incredibly comfortable heat by providing both convected and radiant heat. Radiant heat warms objects rather than air, creating a greater sense of warmth faster and at lower room temperatures. Buderus radiators are designed to operate with individual thermostats.

The design and styling of Buderus radiators eliminates the noise associated with other heating systems and utilize less space than baseboard. Unique Buderus styling also minimizes area where dust and dirt can collect. All these features combine to offer you a cleaner, quieter, and more comfortable source of heat. All Buderus panel radiators are supplied in powder-enameled white. If you prefer, you can paint them any color you wish. Each panel includes side panels, grill covers and flowsetter valve.

**Note: BTU Output @ 180° F .

Because of the special nature of this product it does not qualify for free shipping and our website cannot quote the best freight. Please place your order on our website and we will contact you with freight options. Even better, call us to check availability and freight!