Search results for '3/4" ID GAS HOSE'

 

CENTRAL HEATING CLEANER F5 EXPRESS

 

• Quick ,convenient and simple to use – doses in 30 seconds

 

• Added via a radiator adapter or filling loop supplied

 

• 100% recyclable can

 

• Compatible with all metals and materials including aluminium

 

• Removes sludge and scale and restores heating efficiency

 

• Removes flux residues and other debris

 

• Neutral, non-hazardous and environmentally formulation

Cleaner F5 Express has been designed for pre-commission cleaning of new installations in accordance with BS7593:1992, removing flux residues and other installation debris, to help extend the life of a system.

Cleaner F5 Express can be used in conjunction with Fernox Powerflow MKII machine and all known makes of powerflushing machines to remove all debris, sludge and scale from existing systems. In this way, it will restore heating efficiency and eliminate or reduce boiler noise in heavily contaminated systems.

If the system is heavily scaled the use of Fernox DS40 System Cleaner is recommended.

Cleaner F5 Express is a neutral, non-hazardous product that is well inhibited and compatible with all metals and materials commonly used in heating systems.

For continued long term protection the system should be thoroughly cleaned and flushed in accordance with legislation BS7593:1992 and Benchmark using Fernox Cleaner F5 Express, before treating with a Fernox Protector F1. We recommend Protector levels are checked regularly (annually).

Physical Properties

Colour: Amber

Odour: Faint

Form: Liquid

pH (conc): 7

pH (1% soln) 7.5 - 7.8

SG: 1.201 g/cm

3

(20°C / 68°F)

 Cleaner F5 Express will protect an average sized system (100 litres or up to ten single radiators) and maybe added via a radiator or filling loop. Fernox Cleaner F5 Express can be dispensed directly into a radiator air vent or system filling loop using the appropriate special adapter supplied with the product. Additional/repeat applications of Cleaner F5 Express may be necessary, for larger systems or if systems are heavily sludged.

When using Cleaner F5 Express with a powerflushing unit, cleaning should be completed within an hour. Use dynamic flushing with plain water until the water is clear, testing with the TDS meter as above to ensure thorough flushing.

Refill the system adding a suitable Fernox Protector for long term protection against corrosion and limescale.

In single feed indirect cylinders, e.g. "Primatic" or similar, potable water chemicals must be used.

First drain and refill the entire system with plain water. For optimum results the entire system, including drop feed radiators, where fitted, should be completely drainable. Preferably full bore gate valves with hose connectors should be provided temporarily for this purpose. Motorised and thermostatically controlled valves must be set so that no part of the system is closed off during cleaning or rinsing. Discharges must be made to the foul drain and not the surface water drain.

For open vented systems add Fernox Cleaner F5 Express via the header tank. For sealed systems add via a radiator using a Fernox Injector.

When cleaning existing systems, sludge and debris should be dispersed for at least one hour at normal operating temperatures. However, to remove hardened iron oxides and limescale, the cleaning time can be extended to up to one week under the normal heating cycle. If a radiator still has a cold spot after one hour, increase the flow through the radiator by closing the valves on the other radiators. An additional or repeat dose of Cleaner F5 Express may be necessary in some cases.

Drain and flush the system thoroughly to remove the cleaning chemical and debris. At least three complete changes of water are likely to be required. This is a crucial part of the cleaning process and must be carried out correctly. Use a rinse test meter such as the Fernox TDS meter to ensure that the Total Dissolved Solids have been satisfactorily removed. The system can be regarded as being thoroughly flushed when the system water value is within 10% of the mains water value. Differences over 10% mean that significant cleaner residues have been left in the system and further flushing is required. If not removed, cleaner residues will promote corrosion and negate the cleaning process.

Fernox Cleaner F5 Express is supplied in 280ml aerosol cans with a universal applicator set.

Fernox Cleaner F5 Express is classified as non-hazardous. But as with all chemicals: Keep out of reach of children. In case of contact with skin or eyes, rinse immediately with plenty of water. Wear suitable gloves

Product Features

•  125# CWP
•  Brass Body
•  PTFE Seats
•  Male Thread X Hose
•  1/2” size also accepts solder joint
•  No-Kink spout

In heating and air conditioning control systems, the circulation of water containing impurities may result in rapid wear and damage to components such as pumps and control valves. It also causes blockages in heat exchangers, heating elements and pipes, resulting in lower thermal efficiency within the system. The dirt separator separates off these impurities, which are mainly made up of particles of sand and rust, collecting them in a large collection chamber, from which they can be removed even while the system is in operation. This device is capable of efficiently removing the smallest particles, with low head loss.

Grundfos cast iron flange sets include: 2 each - flanges, gaskets, bolts with nuts. Use with Versa Flo UP and UPS pumps.

• 1-1/2-Inch HV FNPT flange kit
• 2 flanges
• 4 nuts
• 4 bolts
• 2 gaskets

RadiantPEX-AL Compression Couplings (Equal)

RadiantPEX-AL Adapter- Press x Female Sweat (Copper Adapter)

Webstone Isolation Flanges are designed for residential and commercial use with all 2 bolt flanged circulator pumps. The forged brass body and flange provide strength and versatility for any application where a pipe and flange meet. This approved Webstone valve features a solid hard chrome plated brass ball with reinforced Teflon seats and a blowout proof stem sealed with Teflon and an adjustable packing gland. Additional wing style "T" handle included with mounting nuts and bolts.

Buderus, the world's largest producer of cast iron boilers, manufactures high output hydronic steel panel radiators which are stocked in the U.S. Panel radiators produce an incredibly comfortable heat by providing both convected and radiant heat. Radiant heat warms objects rather than air, creating a greater sense of warmth faster and at lower room temperatures. Buderus radiators are designed to operate with individual thermostats.

The design and styling of Buderus radiators eliminates the noise associated with other heating systems and utilize less space than baseboard. Unique Buderus styling also minimizes area where dust and dirt can collect. All these features combine to offer you a cleaner, quieter, and more comfortable source of heat. All Buderus panel radiators are supplied in powder-enameled white. If you prefer, you can paint them any color you wish. Each panel includes side panels, grill covers and flowsetter valve.

**Note: BTU Output @ 180° F .

Because of the special nature of this product it does not qualify for free shipping and our website cannot quote the best freight. Please place your order on our website and we will contact you with freight options. Even better, call us to check availability and freight!