Radiant PEX-AL is a composite pipe engineered for radiant floor heating. It's proven, long lasting and maintenance free. Installers like it because it's lightweight, durable and can be shaped to fit any jobsite. The aluminum layer protects boiler systems against corrosion and it has superior temperature and pressure ratings. RadiantPEX-AL pipe and fittings are manufactured to American Standard Testing Methods for requirements and test methods for materials, workmanship, dimensions, environmental stress, cracking, sustained hydrostatic pressure strength, thermo-cycling resistance and bend strength, among other tests. RadiantPEX-AL meets or exceeds these specifications.
Johnson Controls S350AA-1C Temperature Stage Module
The S350 Stage Module is used in conjunction with the A350, A350E, A350P, and A350R series temperature controls to add multiple stage capability. The S350 module has an SPDT output relay and three adjustments including offset (de-energize stage action from setpoint), heating or cooling mode, and differential. Using a Y350R, up to nine S350s can be added to the A350, A350E, and A350R via the 5-pin, plug-in connector. Using a Y350R wth an A350P, up to four S350s can be added. Using a 40 VA or greater external transformer wth an A350P, up to nine S350s can be added.
Caleffi Series 676 Two-way Thermoelectric Zone Valve
Zone valves are used to control hot and chilled water in heating and air conditioning
systems. Coupled with an electro-thermal control actuator and
managed by a room thermostat, they allow automatic on/off control of the
hydronic circuit on which they are installed.
Their special feature is their compact size and they can therefore be installed
almost anywhere including baseboard or directly in fan-coil units.
Grundfos UP15-29SU model circulator incorporates a stainless steel body design and 1-1/4" union connection, smaking it suitable for a wide range of open and closed loop radiant heating, hydronic heating, hot water recirculation, solar & other applications.
Caleffi Series 5213 Scald Protection Three Way Mixing Valve
Adjustable, anti-scald thermostatic mixing valve.
The thermostatic mixer is used in systems producing domestic hot water or in radiant panel heating systems. Its function is to maintain the temperature of the mixed water supplied to the user constant at the set value when there are variations in the supply conditions of the incoming hot and cold water.
The valve has been specifically certified to ASSE 1017.
Wilo Star 30F Cast Iron Single Speed Circular 1/12HP
Wet rotor circulation pump, with flanged connection. (Flange perpendicular to shaft). Cast iron body for hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems.
Johnson Controls Single Stage Digital Temperature Control (120/240v SPDT)
The A419 series controls are single-stage, electronic temperature controls with a Single-Pole, Double-Throw (SPDT) output relay. They feature a lockable front-panel touchpad for setup and adjustment, and a Liquid Crystal Display (LCD) for viewing the temperature and status of other functions. A Light-Emitting Diode (LED) indicates the controls? output relay On/Off status. The A419 controls are available in 24 VAC or 120/240 VAC powered models. The A419 controls have heating and cooling modes, adjustable setpoint and differential, an adjustable anti-short cycle delay, and a temperature offset function. The setpoint range is -30 to 212°F (-34 to 100°C). The controls feature remote sensing capability and interchangeable sensors. The A419 controls are available in either NEMA 1, high-impact plastic enclosure suitable for surface or DIN rail mounting or NEMA 4X watertight, corrosion-resistant surface-mount enclosures.
Single Acting Galvanized Draft Control For Oil, Solid Fuel and Fan Assisted Gas Burners
Heating appliances are designed to operate with a consistent draft. Chimney configurations, mechanical draft fans and weather can cause draft fluctuations. These fluctuations result in inefficient combustion and more frequent service
calls. Draft controls regulate the airflow through a chimney or vent. By diluting the chimney/vent draft with varying amounts of room air they maintain the draft at a heater's flue outlet within a consistent, safe and efficient range.
This single acting control is made of galvanized steel for low maintenance and corrosion resistance. It has integral anchor points and self- aligning, self-centering rocker bearings for long lasting service. A cushioned stop minimizes rattle and noise. Adjustment is easily accomplished by moving counter weight on outside tab.
Grundfos UPS15-35SFC is a 1/6HP, 3-Speed Circulator Pump with stainless steel housing, suitable for a wide range of open loop and closed loop applications, including radiant heating, hydronic heating, solar, hot water recirculation, chilled water cooling and many others. 3 speeds of the Grundfos UPS15-35SFC model allow to adjust pump's parameters to match system requirements and achieve optimal performance.
Wilo Classic Star S 21FX 3 Speed Cast Iron Circulator, Rotated 90 Flange
Wet rotor circulation pump, with flanged connection. (Flange parallel to shaft). Pre-selectable speeds to adjust the capacity on "S" versions. Cast iron body for hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems.
