Seal-less magnetic drive circulator with union or solder connection. Jet Connect fitting pack included. Compact, magnetic drive design. Six inch power cord included. Optional timer available. Domestic hot water re-circulation systems. NSF approved for drinking water applications.
Z-one valves are used to automatically shut-off the flow or redirect hot and
chilled water in hydronic heating and air conditioning systems. The motorized two position, on/off/, spring return A1 series actuator has an
end mounted push button for quick installation to valve body. The actuator is
equipped with or without auxiliary switch and configured Normally closed or
Normally Opened with wire or terminal connections.
Wilo Top S 1.5 by 30 Wet Rotor Hydronics Circulating Pump, 115-Volt
Wilo Top S 1.5 x 30 Two Speed Pump 115VThis pump is made from combination of stainless steel, polypropylene and metal impregnated carbon. It's main feature is the 2 speed motor. This is a wet rotor - "seal less" design type pump. Great for residential and light commercial applicationsPermitted temperature range -20° C to +130° C, in short-term operation (2h) to +140° CPre-selectable speed stages for manual capacity adjustmentPump communication based on simple plug technology that can be reliably retrofittedCombination flanges PN6/ PN10 (DN 40 to DN 65)Cataphoretic coated pump housingThermal insulation shell as standardAutomatically VentedExtensible motor protection, signal and display functions1/4" suction and discharge gauge tappingsFor all hot-water heating systems, air-conditioning systems and closed cooling circuitsFlanges are not inculded.Specifications
The Grundfos UP10-16B5/ATLC model is a Bronze Comfort Series Pump with Aquastat, Timer, Line Cord and has 1/2” sweat inlet/outlet connections. Replaces old 96433896 model.
Grundfos Comfort series pumps, such as the UP10-16B5/ATLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.
UP 1510 B7/LC The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by: Ceramic shaft and radial bearings. Carbon axial bearing. Stainless steel rotor can and bearing plate. Corrosion resistant impeller, Composite, PES. Bronze pump housing. The motor is a 1 phase motor. No additional motor protection is required.
Grundfos UP10-16B5/TLC Pump, 1/2" Sweat, 115V, Timer & Line Cord
Grundfos UP10-16B5/TLC model (Grundfos SKU# 96433895) is a Bronze Comfort Series Pump with Timer, Line Cord and has 1/2” sweat inlet/outlet connections.
Grundfos Comfort series pumps, such as the UP10-16B5/TLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.
Grundfos Alpha 15-55F/LC Circulator Pump (59896832) is a variable speed circulator with a built-in check valve and Line Cord. With its permanent magnet motor design, this energy efficient circulator reduces power consumption by 50% or more. The unique patented AUTOADAPT feature of the Grundfos 15-55F/LC model controls pump performance automatically within defined performance range, ensuring lowest possible energy consumption without sacrificing comfort. Conveniently installed line cord allows to plug the circulator right into the electrical outlet, bypassing unnecessary wiring.
Grundfos 1/6 HP 115V Circulating Pump Cast Iron Body
The Grundfos UP26-120 U is a cast iron circulator pump for closed circulation of water. The Grundfos model utilizes a two-pole, single phase motor at 1/6 (0.16) HP and produces a flow range of 0-19 GPM and a head range of 0-38 ft. The Grundfos UP26-120 U circulator pump functions at 115V, 2.15 Amp, and 60Hz, and has a maximum pressure of 145 PSI. The optimal water temperature for this Grundfos circulator pump model is within the 32-203 F range.
The Grundfos UP26-120 U circulator pump utilizes a 1-1/4 inch union connection.
Adjustable thermostatic and pressure
balanced mixing valve for point of
distribution in domestic water systems
and radiant hydronic heating systems.
Low-lead brass body.
Internal anti-scale materials.
Locking set point knob.
Max. working pressure: 200 psi.
Max. inlet temperature: 200ºF.
Adjustable range: 85—150ºF.
Gauge scale: 30—210ºF.
Gauge accuracy: ± 6ºF.
Gauge dial: 2" diameter.
ASSE 1017 Listed.
Lead Plumbing Law Compliance:
(0.25% Max. weighted average lead
content).
Lead Plumbing Law Certified by
IAPMO R&T.