1-800-873-3507

TALK TO A REAL HUMAN!
(8am-5pm mst mon-fri)

  • Home /
  • Search results for: '3/4" ID GAS HOSE'

Search results for '3/4" ID GAS HOSE'

Items 31 to 40 of 449 total

per page
Page:
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Grid  List 

Set Ascending Direction
  1. Watts Radiant 1/2" Swedged Manifolds -3 outlets

    Watts Radiant 1/2" Swedged Manifolds -3 outlets

    Watts Radiant 1/2" Swedged Manifolds
    Swedged Manifolds are Easy to Stock and Easy to Assemble. These 1" Copper Manifolds are Closed at one End and Swedged at the Other. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
    $28.87

  2. Watts Radiant 3 Sided Reamer 5/8", 3/4" and 1"

    Watts Radiant 3 Sided Reamer 5/8", 3/4" and 1"

    Watts Radiant 3 Sided Reamer 5/8", 3/4" and 1"
    RadiantPEX-AL Pipe Reamers
    $9.20

  3. Watts Radiant 3/8" Swedged Manifolds Open Ended

    Watts Radiant 3/8" Swedged Manifolds Open Ended

    Watts Radiant 3/8" Swedged Manifolds Open Ended
    Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
    $24.73

  4. Watts Radiant 3/8" Swedged Manifolds Open Ended-2 outlets

    Watts Radiant 3/8" Swedged Manifolds Open Ended-2 outlets

    Watts Radiant 3/8" Swedged Manifolds Open Ended
    Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).
    $24.73

  5. Duravent PPS Support Elbow, Extended

    Duravent PPS Support Elbow, Extended

    Support Elbow (with extended horizontal length) for Polypropylene pipe used with Venting Gas Appliances. Use the Extended Support Elbow to stabilize the Vertical Termination. Extended horizontal length can be trimmed to size. Includes supporting assembly and mounting channel. Available in 2", 3", 4", and 5" diameter.
    PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
    $39.04 As low as: $37.92

  6. Viessmann Vitodens 200 WB2B Gas Boilers

    Viessmann Vitodens 200 WB2B Gas Boilers

    Viessmann Vitodens 200 WB2B Gas Boilers

    Viessmann Vitoden Gas Boilers

    Gas-fired wall-mounted condensing boiler with modulating stainless steel cylinder burner and Inox-Radial heat exchanger surface.

    Now Equipped with Lambda Pro: Industry's First Intelligent Combustion Management System.

    Model WB2B 19 WB2B 26 WB2B 35 WB2B 45 WB2B 60 WB2B 80 WB2B 105
    CSA input MBH
    kW    		 31-67
    9-20    		 31-93
    9-27    		 31-125
    9-37    		 60-160
    17-47    		 60-212
    17-62    		 104-285
    30-83    		 104-370
    30-108
    CSA output * MBH
    kW    		 28-61
    8-18    		 28-85
    8-25    		 28-114
    8-33    		 55-146
    16-43    		 55-194
    16-57    		 95-260
    29-76    		 98-350
    29-103
    Efficiency (A.F.U.E.) % 96.1 96.1 96.1 96.1 96.1 96.1 96.1


    * Output based on 140ºF / 60ºC, 120ºF / 49ºC system supply/return temperature.

  7. Duravent PPS Support Elbow, Extended 3" Diameter

    Duravent PPS Support Elbow, Extended 3" Diameter

    Support Elbow (with extended horizontal length) for Polypropylene pipe used with Venting Gas Appliances. Use the Extended Support Elbow to stabilize the Vertical Termination. Extended horizontal length can be trimmed to size. Includes supporting assembly and mounting channel. Available in 2", 3", 4", and 5" diameter.
    PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
    $37.92

  8. Paloma PHH-32RDV Multi-Unit System

    Paloma PHH-32RDV Multi-Unit System

    94% Efficient Indoor Condensing Direct Vent Gas Tankless Water Heater with Remote Temperature Control, DUOnex Cable and Commercial Hi-Temp Chips.

    Hi Volume, 2 Unit Commercial System
    This unit uses condensing technology that allows it to be the most efficient whole-home tankless water heating solution at 0.94 Energy Factor. It can also be converted for commercial use up to 185°F with the simple addition of a hi-temp computer chip. A perfect system for Laundromats, car wash, restaurants, hotels, multi-family housing.

    When checking out, add Tankless Installation Valves (WTIV) & Pressure Relief Valve (PRV) and use coupon code EASYINSTALL to receive a bundled package price of $59 (a $77.50 value). Add unit + WTIV + PRV to cart. Discount will be applied in cart ONLY after coupon code is entered.

  9. [This unit vents with PVC pipe - Vertical Condensate Collector]

  10. [This unit vents with PVC pipe - 3 Inch Horizontal or Vertical Concentric Vent Termination]

  11. [This unit vents with PVC pipe - 3 Inch Horizontal Termination for PHH-DV Series]

  12. [This unit vents with PVC pipe - 2 Inch Horizontal Termination for PHH-DV Series]

$2,543.00

  • Duravent PPS Lochinvar Horizontal Termination Kit

    Duravent PPS Lochinvar Horizontal Termination Kit

    Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14" pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. Available in 2" and 3" diameter.
    PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
    $58.03 As low as: $48.98

  • Duravent PPS Lochinvar Horizontal Termination Kit 3" Diameter

    Duravent PPS Lochinvar Horizontal Termination Kit 3" Diameter

    Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14" pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. Available in 2" and 3" diameter.
    PolyPro is a polypropylene vent pipe for use with ANSI Category II and IV gas burning appliances, including tankless and storage water heaters, high-efficiency water heaters, condensing boilers and warm air furnaces. PolyPro is listed by Intertek to the ULC S636 standard in Canada and is rated as a Class IIA, IIB and IIC vent system suitable for exhaust temperatures up to 230°F / 110°C, and a maximum positive pressure of 15 in-w.c.
    $48.98

    • Items 31 to 40 of 449 total

    per page
    Page:
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6

    Grid  List 

    Set Ascending Direction
    Shop By

    Shopping Options

    Category
    1. Tankless Water Heaters (86)
    2. Hydronics (126)
    3. Solar Thermal (36)
    4. Venting (65)
    5. Specials (9)
    6. Free Shipping (5)
    7. Closeouts (7)
    Application
    1. Point-of-Use (8)
    2. 1 to 2 Bathrooms (8)
    3. 2 to 3 Bathrooms (13)
    4. 3+ Bathrooms (9)
    5. Commercial Use (14)
    Electric Voltage
    1. 110 (1)
    2. 208/240 (14)
    Energy Efficiency
    1. $$ (15)
    2. $$$ (19)
    Energy Source
    1. Gas (24)
    2. Electric (16)
    Installation
    1. Indoor/Direct Vent (27)
    2. Outdoor (11)
    quicksetter valve size
    1. 1/2" NPT: .5-1.75 GPM (2)
    2. 3/4" NPT: 2-7 GPM (2)
    3. 1" NPT: 3-10 GPM (2)
    4. 1-1/4" NPT: 5-19 GPM (2)
    Newsletter
    Compare Products

    You have no items to compare.

    My Cart

    You have no items in your shopping cart.

     
    ©1998-2025 Low Energy Systems | All Rights Reserved