Hydronics

Heats a 2 ½ car garage. Turns unheated space into a workshop, exercise room or laundry room.

Ideal for any location where quick heat is needed.

CENTRAL HEATING CLEANER F3

• Neutral universal cleaner for pre-commissioning new systems in accordance with BS7593:2006

• Removes sludge, limescale and other debris to restore heating efficiency of existing systems

• When used in conjunction with Protector F1 gas savings of up to 15% can be achieved every time you heat your room

• Carbon Footprint certified by the Carbon Trust

• Compatible with all metals and materials commonly used in heating systems

• Easy to use, system can be left running normally during cleaning

• Suitable for use with all known powerflushing machines

• Neutral, non-hazardous formula (COSHH rated zero)

Fernox Cleaner F3 is designed to remove all debris, sludge and scale from existing systems of all ages. In this way, it will restore heating efficiency and eliminate or reduce boiler noise. It has also been designed for pre-commission cleansing new installations inaccordance with BS7593:2006, removing flux residues and other debris, thereby helping extend the life of a system. For older sludged systems, Cleaner F3 is particularly effective when used in conjunction with a powerflushing unit. If the system is heavily scaled the use of Fernox DS40 System Cleaner is recommended. Cleaner F3 is a neutral, non-hazardous product that is well inhibited and compatible with all metals and materials commonly used in heating systems. For continued long term protection the system should be thoroughly cleansed and flushed in accordance with BS7593:2006 and Benchmark using Fernox Cleaner F3, before treating with Fernox Protector F1. We recommend Protector levels are checked regularly (annually).

‘If you clean a central heating system using Fernox F3 Cleaner, and protect with Fernox F1 Protector, you can restore and maintain system efficiency resulting in a gas saving of up to 15% every time you heat your room. This saving is equivalent to 90 Kg CO2e per typical home per year.’ This is the equivalent to saving 2400 hours of operating a standard 60W light bulb, or leaving the same light bulb on continuously for 100 days!

 

CENTRAL HEATING CLEANER F5 EXPRESS

 

• Quick ,convenient and simple to use – doses in 30 seconds

 

• Added via a radiator adapter or filling loop supplied

 

• 100% recyclable can

 

• Compatible with all metals and materials including aluminium

 

• Removes sludge and scale and restores heating efficiency

 

• Removes flux residues and other debris

 

• Neutral, non-hazardous and environmentally formulation

Cleaner F5 Express has been designed for pre-commission cleaning of new installations in accordance with BS7593:1992, removing flux residues and other installation debris, to help extend the life of a system.

Cleaner F5 Express can be used in conjunction with Fernox Powerflow MKII machine and all known makes of powerflushing machines to remove all debris, sludge and scale from existing systems. In this way, it will restore heating efficiency and eliminate or reduce boiler noise in heavily contaminated systems.

If the system is heavily scaled the use of Fernox DS40 System Cleaner is recommended.

Cleaner F5 Express is a neutral, non-hazardous product that is well inhibited and compatible with all metals and materials commonly used in heating systems.

For continued long term protection the system should be thoroughly cleaned and flushed in accordance with legislation BS7593:1992 and Benchmark using Fernox Cleaner F5 Express, before treating with a Fernox Protector F1. We recommend Protector levels are checked regularly (annually).

Physical Properties

Colour: Amber

Odour: Faint

Form: Liquid

pH (conc): 7

pH (1% soln) 7.5 - 7.8

SG: 1.201 g/cm

3

(20°C / 68°F)

 Cleaner F5 Express will protect an average sized system (100 litres or up to ten single radiators) and maybe added via a radiator or filling loop. Fernox Cleaner F5 Express can be dispensed directly into a radiator air vent or system filling loop using the appropriate special adapter supplied with the product. Additional/repeat applications of Cleaner F5 Express may be necessary, for larger systems or if systems are heavily sludged.

When using Cleaner F5 Express with a powerflushing unit, cleaning should be completed within an hour. Use dynamic flushing with plain water until the water is clear, testing with the TDS meter as above to ensure thorough flushing.

Refill the system adding a suitable Fernox Protector for long term protection against corrosion and limescale.

In single feed indirect cylinders, e.g. "Primatic" or similar, potable water chemicals must be used.

First drain and refill the entire system with plain water. For optimum results the entire system, including drop feed radiators, where fitted, should be completely drainable. Preferably full bore gate valves with hose connectors should be provided temporarily for this purpose. Motorised and thermostatically controlled valves must be set so that no part of the system is closed off during cleaning or rinsing. Discharges must be made to the foul drain and not the surface water drain.

For open vented systems add Fernox Cleaner F5 Express via the header tank. For sealed systems add via a radiator using a Fernox Injector.

When cleaning existing systems, sludge and debris should be dispersed for at least one hour at normal operating temperatures. However, to remove hardened iron oxides and limescale, the cleaning time can be extended to up to one week under the normal heating cycle. If a radiator still has a cold spot after one hour, increase the flow through the radiator by closing the valves on the other radiators. An additional or repeat dose of Cleaner F5 Express may be necessary in some cases.

Drain and flush the system thoroughly to remove the cleaning chemical and debris. At least three complete changes of water are likely to be required. This is a crucial part of the cleaning process and must be carried out correctly. Use a rinse test meter such as the Fernox TDS meter to ensure that the Total Dissolved Solids have been satisfactorily removed. The system can be regarded as being thoroughly flushed when the system water value is within 10% of the mains water value. Differences over 10% mean that significant cleaner residues have been left in the system and further flushing is required. If not removed, cleaner residues will promote corrosion and negate the cleaning process.

Fernox Cleaner F5 Express is supplied in 280ml aerosol cans with a universal applicator set.

Fernox Cleaner F5 Express is classified as non-hazardous. But as with all chemicals: Keep out of reach of children. In case of contact with skin or eyes, rinse immediately with plenty of water. Wear suitable gloves

Radiant PEX-AL is a composite pipe engineered for radiant floor heating. It's proven, long lasting and maintenance free. Installers like it because it's lightweight, durable and can be shaped to fit any jobsite. The aluminum layer protects boiler systems against corrosion and it has superior temperature and pressure ratings. RadiantPEX-AL pipe and fittings are manufactured to American Standard Testing Methods for requirements and test methods for materials, workmanship, dimensions, environmental stress, cracking, sustained hydrostatic pressure strength, thermo-cycling resistance and bend strength, among other tests. RadiantPEX-AL meets or exceeds these specifications.

RadiantPEX-AL Adapter-Compression x Male Sweat

RadiantPEX-AL Adapter-Compression x Female Sweat

RadiantPEX-AL Compression Couplings (Equal)

Swedged Manifolds are Easy to Stock and Easy to Assemble. There is Sufficient Copper on the Closed End to Cut off and Sweat to Another Manifold. Solder a 2-Branch to a 3 Branch to Make a 5 Branch, a 3-Branch and a Four Branch to make a 7 Branch etc. Four Fitting Styles are Available: Onix, PEX Crimp, RadiantPEX-AL Press, and RadiantPEX-AL Compression. Swedged Manifolds are Sold Individually, with or without Mini Ball Valves (MBVs).