Grundfos UPS15-35SFC is a 1/6HP, 3-Speed Circulator Pump with stainless steel housing, suitable for a wide range of open loop and closed loop applications, including radiant heating, hydronic heating, solar, hot water recirculation, chilled water cooling and many others. 3 speeds of the Grundfos UPS15-35SFC model allow to adjust pump's parameters to match system requirements and achieve optimal performance.
Grundfos UP10-16B5/TLC Pump, 1/2" Sweat, 115V, Timer & Line Cord
Grundfos UP10-16B5/TLC model (Grundfos SKU# 96433895) is a Bronze Comfort Series Pump with Timer, Line Cord and has 1/2” sweat inlet/outlet connections.
Grundfos Comfort series pumps, such as the UP10-16B5/TLC model are most commonly used for domestic hot water recirculation applications, and can be also used for other small heating and recirculation projects.
Grundfos 3-Speed 1/6 Horsepower Circulator Pump with Flow Check
The Grundfos UPS26-99FC is a 3-speed cast iron circulator pump with built-in flow check. 3 speeds (Low/Med/High) of the Grundfos UPS26-99FC make this model very versatile and allow to use it in a large variety of heating applications inlcuding radiant, hydronic, radiators, fan coils, etc. A built-in flow check eliminates the need to buy and install a separate in-line check valve. This circulator is designed for closed loop systems with medium to high flow rates and pressure drops. A built-in automatic resetting thermal protection of the pump assures motor safety and extends circulator's life.
Grundfos UP 1510 F Pump with a Max Flow of 7.93 US GPM, a Head Max of 5.58 Ft and Cast Iron Construction
Grundfos UP15-10F model is a Cast Iron Circulator Pump intended for use in closed loop heating applications such as radiant heating, baseboards, zoning with pumps, fan coils and others.
Grundfos Alpha 15-55F/LC Circulator Pump (59896832) is a variable speed circulator with a built-in check valve and Line Cord. With its permanent magnet motor design, this energy efficient circulator reduces power consumption by 50% or more. The unique patented AUTOADAPT feature of the Grundfos 15-55F/LC model controls pump performance automatically within defined performance range, ensuring lowest possible energy consumption without sacrificing comfort. Conveniently installed line cord allows to plug the circulator right into the electrical outlet, bypassing unnecessary wiring.
UP 1510 B7/LC The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by: Ceramic shaft and radial bearings. Carbon axial bearing. Stainless steel rotor can and bearing plate. Corrosion resistant impeller, Composite, PES. Bronze pump housing. The motor is a 1 phase motor. No additional motor protection is required.
